32 open source boards using the 4011
Real designs built with the 4011, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
PLC-14500
nicolacimmino
160.1 × 101 mm160 parts2LGPL-3.069Cosmac toy v2
kanpapa
72 × 95 mm56 parts2LNo license4Kicad LFO 1 2
promesoft
100 × 100 mm147 parts2LMIT21802-Mini-Super-Elf-Bus
dmadole
100 × 100 mm54 parts2LNo license21802-Mini-Pixie-Video
dmadole
100 × 100 mm49 parts2LGPL-3.021802-Mini-Compact-Flash
dmadole
100 × 100 mm36 parts2LNo license2- schematic only · 73 parts
KiCadLogicalSchemeSimulator
kopavel
73 partsGPL-3.02 1802-Mini-Processor
dmadole
100 × 100 mm64 parts2LNo license11802-Mini-Front-Panel
dmadole
100 × 86.4 mm49 parts2LNo license1- schematic only · 54 parts
Cx22
owen-rp2a03
54 partsNo license1 Revolwer
thefoolGame
100 × 100 mm91 parts2LNo license0Osr
0x007E
77.5 × 50.8 mm85 parts2LCC-BY-NC-4.00Isr
0x007E
77.5 × 50.8 mm83 parts2LCC-BY-NC-4.00CarteDMX512vF767
jvillemejane
109.9 × 134.6 mm79 parts2LNo license0CarteDMX512vF767
IOGS-LEnsE-platforms
109.9 × 134.6 mm79 parts2LNo license01802-Mini-9918-Video
dmadole
100 × 100 mm73 parts2LNo license0Nal
0x007E
77.5 × 50.8 mm66 parts2LCC-BY-NC-4.00STM32
BLDCControl1.kicad Lolin32Lite sch
gyukiss55
157.5 × 109.2 mm45 parts2LNo license0RED 80
assoRED
108.7 × 104.1 mm44 parts4LNo license0Nixie clock
electrojustin
160 × 76.8 mm42 parts2LNo license0- schematic only · 58 parts
Data-Specialties-SRP-3075
jnpastin
58 partsGPL-3.00 Analog2.0 analog sequencer
mkomakonkon
207.5 × 152.5 mm142 parts2LNo license5Kicad LFO 1 3
promesoft
100 × 100 mm147 parts2LMIT2CarteDmx512vFinale
jvillemejane
86.4 × 118.7 mm60 parts2LNo license0Nixie supply
electrojustin
66 × 50.8 mm26 parts2LNo license0AVR/Arduino
VIA I/O Card
rjhelms
99.1 × 78.7 mm69 parts2LNo license2CarteDmx512 v2
jvillemejane
86.4 × 118.8 mm23 parts2LNo license0AVR/Arduino
CarteExtensionMidi
jvillemejane
59.1 × 74.3 mm11 parts2LNo license0Chillercontrol
Hal9k-dk
36.8 × 32.4 mm12 parts2LNo license0- schematic only · 8 parts
Step counter
carr-james
8 parts2LNo license0 DelSol Voice
dzavalishin
110.5 × 32.4 mm69 parts2LNo license3DelSol Voice 2
dzavalishin
114.9 × 35.6 mm64 parts2LNo license3
How designs wire the 4011
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the 4011 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 9 of 22 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 7 | Connected to: GND 100% | — |
| VDDpin 14 | Connected to: VCC 91% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PLC-14500 by nicolacimmino, Analog2.0 analog sequencer by mkomakonkon, Cosmac toy v2 by kanpapa and DelSol Voice by dzavalishin.
The 4011 in open source designs
The gallery holds 32 open source boards using the 4011 from 26 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 62 components.
97% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.
The most starred is PLC-14500 by nicolacimmino.
Microcontrollers on boards using the 4011
What boards using the 4011 are built for
4011: common questions
Where can I find a 4011 reference design?
Each of the 32 boards on this page is a real design using the 4011. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 4011 VDD pin?
The VDD pin has a decoupling capacitor on 9 of 22 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 22 open source designs using the 4011.
What parts are used alongside the 4011?
The 4001, 4013, 4071, 4023 and L7805 appear in the most repositories here.
Which microcontrollers do boards using the 4011 use?
Most are built on AVR/Arduino (3) and STM32 (1).
How big is a typical board using the 4011?
The median is 100 × 100 mm, and 97% are two-layer designs.
What is the most popular open source board using the 4011?
By GitHub stars, PLC-14500 by nicolacimmino, with 69 stars.
Can I simulate one of these boards using the 4011 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.