Flipklok

h-buter·Flipklok·PCB/Flipklok/Flipklok.kicad_pcb

Flipklok PCB layout, top view — open source TI MSP430/CC board by h-buter

About the Flipklok PCB

Flipklok is an open source TI MSP430/CC PCB design by h-buter, published on GitHub. It is a 2-layer board measuring 48 × 72 mm, with 58 components from 45 distinct parts.

Its main chip is the MSP430G2553IN20, from the TI MSP430/CC family. Other key parts include the AP2205, 74HC00 and ULQ2003A. By type, the board carries 15 resistors, 14 capacitors, 10 connectors, 9 diodes, 5 ICs and 2 fuses.

It belongs with the robotics & motion designs in this gallery.

From the project

Welcome to the repository for my project as part of my Bachelor's degree in Electronics at Windesheim. This project involves creating a flip clock inspired by the design from the 1970s, which is synchronized using time information from the DCF77 long-wave time signal. The goal is

Welcome to the repository for my project as part of my Bachelor's degree in Electronics at Windesheim. This project involves creating a flip clock inspired by the design from the 1970s, which is synchronized using time information from the DCF77 long-wave time signal. The goal is to ensure that this electronic and electromechanical device operates efficiently within a low power environment.

Flipklok, from the project README
From the project README

Main components on the Flipklok

Flipklok bill of materials (BOM)

58 components, 45 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MSP430G2553IN20
U1
1
~
U2
1
AP2205
U3
1
74HC00
U4
1
ULQ2003A
U5
1
ECS-.327-6-13X
Y1
1
Power
J1
1
SW
J2
1
28BYJ-48
J3
1
Backlight
J4
1
DCF77
J5
1
LDR
J6
1
Indicator
J8
1
FW-btn
J10
1
EX-btn
J11
1
Programheader
J12
2
Fuse
F2, F3
1
Reset
SW1
1
PMEG3010ER 30V, 1A
D1
1
ESDCAN01-2BLY
D2
Show 25 more
QtyPartRefs
1
ESDA19SC6
D3
2
S2A 50V 1.5A
D4, D5
4
ESDA5V3SC5
D6, D7, D8, D9
1
SRN6045HA
L1
1
4.7uF 25V X5R
C1
1
10uF 16V X5R
C2
1
0,22uF
C3
1
100PF
100pF
C4
1
1uF 25V X7R
C5
1
2.2uF 10V X7R
C6
1
10UF
10uF
C7
1
1UF
1uF
C8
4
0.1UF
0.1uF
C9, C11, C15, C16
1
1NF
1nF
C10
1
100n
C14
1
82K
82k
R1
1
15K
15k
R2
1
500
R3
2
75k
R4, R6
2
18k
R5, R7
4
10K
10k
R8, R9, R10, R16
1
47K
47k
R12
1
470
R13
1
10k
R14
1
100k
R17

Flipklok design files

The KiCad project lives in the h-buter/Flipklok repository on GitHub; these links point at the commit this page was built from.

Flipklok: common questions

What microcontroller does the Flipklok use?

The Flipklok is built around the MSP430G2553IN20, from the TI MSP430/CC family.

How big is the Flipklok PCB?

The Flipklok measures 48 × 72 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Flipklok?

58 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Flipklok design files?

From the h-buter/Flipklok repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Flipklok design in my own project?

The repository has no license, so all rights stay with h-buter. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Flipklok without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

Similar boards