9 open source boards using the AP2205
Real designs built with the AP2205, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
AirCube
StuckAtPrototype
45 × 45 mm52 parts2LApache-2.0357ESP32
Focus bar panel v1
StuckAtPrototype
120 × 95 mm66 parts2LApache-2.036ESP32
PCB Coaster
StuckAtPrototype
90 × 90 mm70 parts2LNo license30ESP32
GlowPad
StuckAtPrototype
108 × 70 mm40 parts2LApache-2.013ESP32
O-hareAir
Will946
53.1 × 57.7 mm43 parts2LMIT1TI MSP430/CC
Flipklok
h-buter
48 × 72 mm58 parts2LNo license0ESP32
Interactive-Glowpad-PCB-Design
mjvarga
108 × 70 mm40 parts2LNo license0ESP32
FocusBeam
StuckAtPrototype
120 × 25 mm66 parts2LApache-2.036Td hv
tdaede
90 × 71 mm60 parts2LNo license370
How designs wire the AP2205
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the AP2205 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 6 of 8 designs, most often 10 µF (then 2.2 µF).
- The VOUT pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 1 µF).
- The EN pin is tied to 5V on 6 of 8 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 75% · a signal 25% |
|
| GNDpin 2 | Connected to: GND 88% | — |
| ENpin 3 | Connected to: 5V 75% · a signal 25% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 3.3V 86% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Td hv by tdaede, AirCube by StuckAtPrototype, Focus bar panel v1 by StuckAtPrototype and PCB Coaster by StuckAtPrototype.
The AP2205 in open source designs
The gallery holds 9 open source boards using the AP2205 from 8 GitHub repositories; a typical one measures about 90 × 70 mm and carries around 58 components.
100% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is Td hv by tdaede.
Parts used alongside the AP2205
Microcontrollers on boards using the AP2205
What boards using the AP2205 are built for
AP2205: common questions
Where can I find a AP2205 reference design?
Each of the 9 boards on this page is a real design using the AP2205. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AP2205 VIN pin?
The VIN pin has a decoupling capacitor on 6 of 8 designs, most often 10 µF (then 2.2 µF). Counted from the KiCad layouts of 8 open source designs using the AP2205.
What decoupling capacitors do designs use on the AP2205 VOUT pin?
The VOUT pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the AP2205.
How is the AP2205 EN pin connected?
The EN pin is tied to 5V on 6 of 8 designs (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the AP2205.
What parts are used alongside the AP2205?
The ESP32-H2-MINI-1, 74HC00, ENS161, ENS210 and ESP32-S3-WROOM-1 appear in the most repositories here.
Which microcontrollers do boards using the AP2205 use?
Most are built on ESP32 (7) and TI MSP430/CC (1).
How big is a typical board using the AP2205?
The median is 90 × 70 mm, and 100% are two-layer designs.
What is the most popular open source board using the AP2205?
By GitHub stars, Td hv by tdaede, with 370 stars.
Can I simulate one of these boards using the AP2205 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.