USB-C-Regulator
Hang020713·USB-C-Regulator
About the USB-C-Regulator PCB
USB-C-Regulator is an open source PCB design by Hang020713, published on GitHub under the MIT license. It is a 2-layer board measuring 43.2 × 15.5 mm, with 11 components from 9 distinct parts.
Other key parts include the MT3608. By type, the board carries 3 resistors, 2 connectors, 2 capacitors, 1 IC, 1 diode and 1 inductor.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
A compact USB‑C powered boost regulator board based on the MT3608 DC‑DC step‑up converter.
A compact USB‑C powered boost regulator board based on the MT3608 DC‑DC step‑up converter.
This board is designed for small embedded systems, robotics projects, and portable power applications requiring adjustable output voltage from a USB‑C input source.
Open the .kicadpro` file using KiCad 8 to access the full project including schematic and PCB layout.
STM32 Board have below features - [x] Hand-solder friendly footprint design - [x] MT3608 - [x] USB-C Power Connector - [x] Adjustable Output Voltage - [x] Compact PCB Deisgn

Main components on the USB-C-Regulator
USB-C-Regulator bill of materials (BOM)
11 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT3608 | SOT-23-6_Handsoldering | U1 |
| 1 | Output | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J3 |
| 1 | 100k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | ss34 | D_SMA_Handsoldering | D1 |
| 1 | 22u | L_7.3x7.3_H3.5 | L1 |
| 2 | 22u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3 |
| 1 | 2.2k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 2 | 22k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
USB-C-Regulator design files
The KiCad project lives in the Hang020713/USB-C-Regulator repository on GitHub; these links point at the commit this page was built from.
- LayoutUSB-C-Regulator.kicad_pcb
- SchematicUSB-C-Regulator.kicad_sch
USB-C-Regulator: common questions
How big is the USB-C-Regulator PCB?
The USB-C-Regulator measures 43.2 × 15.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-C-Regulator?
11 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB-C-Regulator design files?
From the Hang020713/USB-C-Regulator repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USB-C-Regulator design in my own project?
Yes, under the terms of its MIT license, which Hang020713 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k