MIDI-instrument
hannahhhhhhhhhhhhhhh·MIDI-instrument·kicad/keyboard.kicad_pcb
About the MIDI-instrument PCB
MIDI-instrument is an open source ESP32 PCB design by hannahhhhhhhhhhhhhhh, published on GitHub. It is a 2-layer board measuring 134.2 × 83.1 mm, with 13 components from 4 distinct parts.
Its main chip is the XIAO-ESP32-S3, from the ESP32 family. By type, the board carries 8 diodes, 3 switches, 1 IC and 1 connector.
It belongs with the audio, keyboards and test & measurement designs in this gallery.
Main components on the MIDI-instrument
MIDI-instrument bill of materials (BOM)
13 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3 | XIAO ESP32-S3 | U1 |
| 1 | Conn_01x07 | padd | J1 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW2, SW3, SW4 |
| 8 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3, D4, D5, D6, D7, D8 |
MIDI-instrument design files
The KiCad project lives in the hannahhhhhhhhhhhhhhh/MIDI-instrument repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/keyboard.kicad_pcb
- Schematickicad/keyboard.kicad_sch
MIDI-instrument: common questions
What microcontroller does the MIDI-instrument use?
The MIDI-instrument is built around the XIAO-ESP32-S3, from the ESP32 family.
How big is the MIDI-instrument PCB?
The MIDI-instrument measures 134.2 × 83.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MIDI-instrument?
13 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the MIDI-instrument design files?
From the hannahhhhhhhhhhhhhhh/MIDI-instrument repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MIDI-instrument design in my own project?
The repository has no license, so all rights stay with hannahhhhhhhhhhhhhhh. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MIDI-instrument without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k