Base

hansgaensbauer·Cat-Counter-Measures·Circuit Boards/base/base.kicad_pcb

Base PCB layout, top view — open source Microchip SAM board by hansgaensbauer

About the Base PCB

Base is an open source Microchip SAM PCB design by hansgaensbauer, published on GitHub. It is a 2-layer board measuring 26.1 × 69.1 mm, with 31 components from 18 distinct parts.

Its main chip is the ATSAMD21E17D-M, from the Microchip SAM family. Other key parts include the NCP1117-3.3_SOT223. By type, the board carries 11 capacitors, 8 resistors, 3 connectors, 3 inductors, 2 ICs and 2 crystals.

From the project

Counter Cat Countermeasures

Main components on the Base

ATSAMD21E17D-MNCP1117-3.3_SOT223

Base bill of materials (BOM)

31 components, 18 distinct parts.

QtyPartRefs
1
ATSAMD21E17D-M
U1
1
NCP1117-3.3_SOT223
U3
1
Crystal_Small
Y1
1
Crystal_GND24
Y2
1
Conn_02x05_Odd_Even
J1
1
Conn_01x02
J4
1
USB_C_Receptacle_USB2.0_16P
J5
1
TestPoint
TP1
1
LED_Small
D2
1
FerriteBead_Small
FB1
2
10u
L1, L2
4
C_Small
C1, C2, C3, C4
4
10p
C5, C6, C11, C12
3
100n
C7, C8, C18
1
1.5k
R1
2
5.1k
R2, R8
4
10k
R3, R4, R5, R6
1
470
R16

Base design files

The KiCad project lives in the hansgaensbauer/Cat-Counter-Measures repository on GitHub; these links point at the commit this page was built from.

Base: common questions

What microcontroller does the Base use?

The Base is built around the ATSAMD21E17D-M, from the Microchip SAM family.

How big is the Base PCB?

The Base measures 26.1 × 69.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Base?

31 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Base design files?

From the hansgaensbauer/Cat-Counter-Measures repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Base design in my own project?

The repository has no license, so all rights stay with hansgaensbauer. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Base without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in Cat-Counter-Measures

Similar boards