Mainboard
hansgaensbauer·Cat-Counter-Measures·Circuit Boards/mainboard/mainboard.kicad_pcb
About the Mainboard PCB
Mainboard is an open source Microchip SAM PCB design by hansgaensbauer, published on GitHub. It is a 2-layer board measuring 61 × 96.4 mm, with 74 components from 33 distinct parts.
Its main chip is the ATSAMD21E17D-M, from the Microchip SAM family. Other key parts include the AMS1117-3.3. By type, the board carries 23 capacitors, 22 resistors, 7 transistors, 7 connectors, 5 test points and 4 inductors.
From the project
Counter Cat Countermeasures
Main components on the Mainboard
Mainboard bill of materials (BOM)
74 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ATSAMD21E17D-M | QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U2 |
| 3 | NTTFS5C454NL | WDFN8 | Q1, Q2, Q3 |
| 1 | AOD407 | TO-252-2 | Q4 |
| 1 | DMG2305UX-7 BSS84 | SOT-23 | Q5 |
| 1 | BS170F | SOT-23 | Q6 |
| 1 | BSS84 | SOT-23 | Q7 |
| 1 | Crystal_GND24 | Crystal_SMD_WE_CFPX-180-4Pin_3.2x2.5mm | Y1 |
| 1 | Crystal_Small | Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm | Y2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SM04B-SRSS-TB Conn_01x04_SH | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical | J3 |
| 1 | 691137710002 Screw_Terminal_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J4 |
| 2 | 691137710002 Screw_Terminal_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J6 |
| 1 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J7 |
| 5 | TestPoint | TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3, TP4, TP5, TP6, TP7 |
| 1 | LED_Small | LED_0805_2012Metric | D1 |
| 1 | SDT10A45P5 D_Schottky_3Pin | PowerDI5 | D3 |
| 1 | FerriteBead_Small | R_0603_1608Metric | FB1 |
| 2 | 10u | L_0805_2012Metric | L1, L2 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74439344010 1u | L_Wuerth_XHMI-6060 | L3 |
| 3 | 100n | C_0603_1608Metric | C1, C2, C14 |
| 4 | 10p | C_0603_1608Metric | C3, C4, C5, C6 |
| 10 | BCAP0005 P300 X11 5 | CP_Radial_D10.0mm_P5.00mm | C7, C8, C15, C16, C17, C18, C19, C20 +2 |
| 5 | C_Small | C_0603_1608Metric | C9, C10, C12, C13, C23 |
| 1 | C_Small | C_0805_2012Metric | C11 |
| 5 | 10k | R_0603_1608Metric | R1, R2, R4, R5, R6 |
| 1 | R | R_2512_6332Metric | R3 |
| 10 | 2.7k | C_0603_1608Metric | R7, R8, R11, R12, R13, R14, R15, R16 +2 |
| 1 | 470 | C_0603_1608Metric | R9 |
| 1 | 10 | C_0603_1608Metric | R10 |
| 2 | 10k | C_0603_1608Metric | R19, R20 |
| 2 | 4.7k | C_0603_1608Metric | R21, R22 |
Mainboard design files
The KiCad project lives in the hansgaensbauer/Cat-Counter-Measures repository on GitHub; these links point at the commit this page was built from.
Mainboard: common questions
What microcontroller does the Mainboard use?
The Mainboard is built around the ATSAMD21E17D-M, from the Microchip SAM family.
How big is the Mainboard PCB?
The Mainboard measures 61 × 96.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mainboard?
74 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mainboard design files?
From the hansgaensbauer/Cat-Counter-Measures repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mainboard design in my own project?
The repository has no license, so all rights stay with hansgaensbauer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mainboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in Cat-Counter-Measures
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416