MicroPSU
Haptic-Solutions·MicroPSU
About the MicroPSU PCB
MicroPSU is an open source PCB design by Haptic-Solutions, published on GitHub under the Custom license license. It is a 4-layer board measuring 35 × 25 mm, with 32 components from 21 distinct parts.
Other key parts include the SIC431DED-T1-GE3 and L7805. By type, the board carries 12 capacitors, 9 resistors, 4 jumpers, 2 ICs, 2 fuses and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
A small but powerful general purpose buck converter.
Open source under the https://creativecommons.org/licenses/by-nc/4.0/ to be used for personal projects. However, if you would like to use it for commercial use please feel free to reach out to peter@hapticsol.com to negotiate a low cost license fee.
Dual output adjustable power supply based off of the SIC431 chip for high current output in a very small form factor and end-user choice of linear side regulator for low ripple output or standby power.
Main components on the MicroPSU
MicroPSU bill of materials (BOM)
32 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SIC431DED-T1-GE3 | SIC431DEDT1GE3 | IC1 |
| 1 | L7805 | TO-252-3_TabPin2 | U1 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J1 |
| 1 | R_Potentiometer_Trim_US | Potentiometer_Bourns_TC33X_Vertical | 200K1 |
| 2 | 10A 9A Fuse | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2 |
| 4 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 1 | 54.4uH | L_Vishay_IHLP-5050 | L1 |
| 1 | 4.7UF 4.7uF1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C0 |
| 4 | 22UF 22uF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C3, C8, C11 |
| 1 | 0.1UF 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 0.1UF 0.1uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C4 |
| 1 | EMK316BBJ476ML-T | CAPC3216X180N | C5 |
| 3 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C9, C10 |
| 1 | 1UF 1uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C7 |
| 1 | 1 Ω | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 2 | 10K 10kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R7 |
| 1 | 51K 51kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 51K 499kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 1 | 10K 10 kΩ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | R5 |
| 1 | 10K 10kΩ | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | R6 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10kΩ | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R9 |
MicroPSU design files
The KiCad project lives in the Haptic-Solutions/MicroPSU repository on GitHub; these links point at the commit this page was built from.
MicroPSU: common questions
How big is the MicroPSU PCB?
The MicroPSU measures 35 × 25 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the MicroPSU?
32 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MicroPSU design files?
From the Haptic-Solutions/MicroPSU repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MicroPSU design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k