Mcp breadboard
About the Mcp breadboard PCB
Mcp breadboard is an open source PCB design by HarkonenBade, published on GitHub under the MIT license. It is a 2-layer board measuring 48.3 × 35.6 mm, with 25 components from 22 distinct parts.
Other key parts include the MCP2221AxSL and MCP1826S. By type, the board carries 6 diodes, 5 connectors, 5 resistors, 4 capacitors, 3 switches and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Mcp breadboard
Mcp breadboard bill of materials (BOM)
25 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2221AxSL | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | MCP1826S | SOT-223-3_TabPin2 | U2 |
| 2 | VDD | PinHeader_2x02_P2.54mm_Vertical | J1, J2 |
| 1 | GPIO | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | UART/SPI | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J5 |
| 1 | RST | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_6.7x11.72mm_W8.61mm_P2.54mm_LowProfile | SW2 |
| 1 | VDD_SEL | PinHeader_1x03_P2.54mm_Vertical | SW3 |
| 1 | Rx | LED_0805_2012Metric | D1 |
| 1 | Tx | LED_0805_2012Metric | D2 |
| 1 | USB | LED_0805_2012Metric | D3 |
| 1 | I2C | LED_0805_2012Metric | D4 |
| 1 | PWR | LED_0805_2012Metric | D5 |
| 1 | RCLAMP0582B | SOT-523 | D6 |
| 1 | 100n | C_0603_1608Metric | C1 |
| 1 | 1u | C_0603_1608Metric | C2 |
| 2 | 10u | C_0805_2012Metric | C3, C4 |
| 2 | 4k7 | R_0603_1608Metric | R1, R2 |
| 1 | 10k | R_0603_1608Metric | R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_0603_1608Metric | R4 |
| 1 | 1k | R_Array_Convex_4x0603 | RN1 |
Mcp breadboard design files
The KiCad project lives in the HarkonenBade/mcp_breadboard repository on GitHub; these links point at the commit this page was built from.
- Layoutmcp_breadboard.kicad_pcb
- Schematicmcp_breadboard.kicad_sch
Mcp breadboard: common questions
How big is the Mcp breadboard PCB?
The Mcp breadboard measures 48.3 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mcp breadboard?
25 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mcp breadboard design files?
From the HarkonenBade/mcp_breadboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mcp breadboard design in my own project?
Yes, under the terms of its MIT license, which HarkonenBade chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979