10 open source boards using the MCP1826S
Real designs built with the MCP1826S, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Teacup
HackerComputerCompany
86.2 × 56.2 mm76 parts4LGPL-2.031Decelerator4030
Sakura-IT
171 × 82.4 mm87 partsNo license9BGeigieIntegrated
IRNAS
66.8 × 104.8 mm86 parts2LCustom license6ESP32
Homectrl v2
jeevan9s
64 × 70.5 mm127 parts4LNo license2STM32
HUMA-Rocket-Flight-Computer
manyetox
51.9 × 113.8 mm150 parts6LNo license0Arty scope expansion board
Filip-Kubecki
109 × 75.5 mm130 parts4LNo license0Microchip SAM
Neodrone v1
dulatello08
100 × 89 mm75 parts4LNo license0ESP32
Walkmini
Np3-0
113.6 × 92.3 mm64 parts2LCC-BY-NC-4.00Mcp breadboard
HarkonenBade
48.3 × 35.6 mm25 parts2LMIT0Microchip SAM
Neodrone v1-noreturn
dulatello08
100 × 89 mm75 parts4LNo license0
How designs wire the MCP1826S
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MCP1826S connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 10 µF).
- The VO pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: 5V 56% · a signal 44% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VOpin 3 | Connected to: 3.3V 89% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Teacup by HackerComputerCompany, Decelerator4030 by Sakura-IT, BGeigieIntegrated by IRNAS and Homectrl v2 by jeevan9s.
The MCP1826S in open source designs
The gallery holds 10 open source boards using the MCP1826S from 9 GitHub repositories; a typical one measures about 93.1 × 85.7 mm and carries around 81 components.
67% use four copper layers or more, and 20% carry an open source license.
The most starred is Teacup by HackerComputerCompany.
Microcontrollers on boards using the MCP1826S
What boards using the MCP1826S are built for
MCP1826S: common questions
Where can I find a MCP1826S reference design?
Each of the 10 boards on this page is a real design using the MCP1826S. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1826S VI pin?
The VI pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the MCP1826S.
What decoupling capacitors do designs use on the MCP1826S VO pin?
The VO pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the MCP1826S.
Which microcontrollers do boards using the MCP1826S use?
Most are built on ESP32 (2), Microchip SAM (2) and STM32 (1).
How big is a typical board using the MCP1826S?
The median is 93.1 × 85.7 mm, and 33% are two-layer designs.
What is the most popular open source board using the MCP1826S?
By GitHub stars, Teacup by HackerComputerCompany, with 31 stars.
Can I simulate one of these boards using the MCP1826S before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.