Power8Board
Harry-IV·Power8Board·Power8Board V1/Power8Board V1.kicad_pcb
About the Power8Board PCB
Power8Board is an open source PCB design by Harry-IV, published on GitHub under the GPL-3.0 license. It is a 6-layer board measuring 102 × 102 mm, with 107 components from 34 distinct parts.
Other key parts include the INA240A2PWR and ADS1015IDGS. By type, the board carries 35 capacitors, 32 resistors, 14 ICs, 11 connectors, 11 inductors and 4 diodes.
It belongs with the robotics & motion and test & measurement designs in this gallery.
From the project
Jesuit Robotics 2025-2026 Power Board.
48V → 12V Power Distribution & Current-Sensing Board for 8 Thrusters
Power8Board is a custom power distribution and sensing PCB intended for robotics applications (e.g. ROVs / AUVs) where 6 DoF control is needed from eight thrusters.
The board converts 48V DC into 5V and 12V rails, distributes power to eight ESCs, and provides per-thruster current measurement and voltage rail monitoring (3.3, 5, 12, 48) over I²C.
Main components on the Power8Board
Power8Board bill of materials (BOM)
107 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ~ | MPQ860-12V72-L48NBMC | U1, U2 |
| 1 | ~ | UWS-5_10-Q48 | U3 |
| 8 | INA240A2PWR | PW0008A_M | U4, U5, U6, U7, U8, U9, U10, U11 |
| 3 | ADS1015IDGS | TSSOP-10_3x3mm_P0.5mm | U12, U13, U14 |
| 8 | XT30 | AMASS_XT30U-M_1x02_P5.0mm_Vertical | J0, J1, J2, J3, J4, J5, J6, J7 |
| 1 | Qwiic_RA | QWIIC Connector RA | J8 |
| 1 | MR30PW-M | AMASS_MR30PW-M_1x03_P3.50mm_Horizontal | J9 |
| 1 | XT60IPW-M | AMASS_XT60IPW-M_1x03_P7.20mm_Horizontal | J10 |
| 1 | Amber | WL-SMCW_0805 | D1 |
| 1 | Red | WL-SMCW_0805 | D2 |
| 1 | Yellow | WL-SMCW_0805 | D3 |
| 1 | Green | WL-SMCW_0805 | D4 |
| 2 | FerriteBead | 0603 Ferrite Bead | FB1, FB2 |
| 9 | FerriteBead | BEADC2012X105N | FB3, FB4, FB5, FB6, FB7, FB8, FB9, FB10 +1 |
| 3 | 100 uF | CAP_AVG-8x12_ILC | C1, C2, C3 |
| 8 | 2.2 uF | C_0603_1608Metric | C4, C5, C30, C31, C32, C33, C34, C35 |
| 8 | 0.1 uF | CAPC2012X140N | C6, C8, C10, C19, C26, C27, C28, C29 |
| 2 | 100 pF | CAPC2012X140N | C7, C9 |
| 8 | 120 uF | PCAP_SVP_C6_PAN-M | C11, C12, C13, C14, C15, C16, C17, C18 |
| 2 | 10 uF | C_0603_1608Metric | C20, C22 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.1 uF | C_0603_1608Metric | C21, C23 |
| 1 | 10 uF | C_0805_2012Metric | C24 |
| 1 | 0.1 uF | C_0805_2012Metric | C25 |
| 3 | 10k | R_0805_2012Metric | R1, R2, R3 |
| 1 | 470k | R_0805_2012Metric | R4 |
| 8 | 680 | R_0603_1608Metric | R5, R26, R27, R28, R29, R30, R31, R32 |
| 1 | 25k | R_0805_2012Metric | R6 |
| 6 | 470k | RES_TNPW0805_VIS | R7, R8, R10, R11, R12, R20 |
| 1 | 110k | R_0805_2012Metric | R9 |
| 8 | 0.0033 | RES_VISHAY_WSLP2512_A_VIS | R13, R14, R15, R16, R17, R18, R19, R25 |
| 1 | 680 | R_0805_2012Metric | R21 |
| 1 | 2.2k | R_0805_2012Metric | R22 |
| 1 | 1.2k | R_0805_2012Metric | R23 |
| 1 | 56k | R_0805_2012Metric | R24 |
Power8Board design files
The KiCad project lives in the Harry-IV/Power8Board repository on GitHub; these links point at the commit this page was built from.
Power8Board: common questions
How big is the Power8Board PCB?
The Power8Board measures 102 × 102 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Power8Board?
107 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power8Board design files?
From the Harry-IV/Power8Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Power8Board design in my own project?
Yes, under the terms of its GPL-3.0 license, which Harry-IV chose for the repository.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979