6 open source boards using the INA240A2PWR
Real designs built with the INA240A2PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Moss
metrox-eth
82 × 79 mm208 parts4LApache-2.0116RP2040/RP2350
Compact-SimpleFOC-Board
maruta
35 × 35 mm61 parts4LMIT22Power8Board
Harry-IV
102 × 102 mm107 parts6LGPL-3.00RP2040/RP2350
Control Board V3
Thornbots
75 × 100 mm72 parts4LNo license0- schematic only · 24 partsSTM32
Mechatronics-Roadmap
TLE47
24 partsCC-BY-4.00 RP2040/RP2350
Measurement Testing
Thornbots
52.5 × 45 mm30 parts2LNo license0
The INA240A2PWR in open source designs
The gallery holds 6 open source boards using the INA240A2PWR from 5 GitHub repositories; a typical one measures about 75 × 79 mm and carries around 67 components.
80% use four copper layers or more, and 67% carry an open source license.
The most starred is Moss by metrox-eth.
Microcontrollers on boards using the INA240A2PWR
What boards using the INA240A2PWR are built for
INA240A2PWR: common questions
Where can I find a INA240A2PWR reference design?
Each of the 6 boards on this page is a real design using the INA240A2PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA240A2PWR use?
Most are built on RP2040/RP2350 (3), ESP32 (1) and STM32 (1).
How big is a typical board using the INA240A2PWR?
The median is 75 × 79 mm, and 20% are two-layer designs.
What is the most popular open source board using the INA240A2PWR?
By GitHub stars, Moss by metrox-eth, with 116 stars.
Can I simulate one of these boards using the INA240A2PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.