HardLabs

ESP32ModuleDesign

harrymadison297·HW__IoT-Hardware-Design·ESP32S3-Devkit-Design/ESP32ModuleDesign.kicad_pcb

ESP32ModuleDesign PCB layout, top view — open source ESP32 board by harrymadison297

About the ESP32ModuleDesign PCB

ESP32ModuleDesign is an open source ESP32 PCB design by harrymadison297, published on GitHub. It is a 2-layer board measuring 31 × 49.5 mm, with 14 components from 9 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 4 resistors, 3 capacitors, 2 ICs, 2 connectors, 2 switches and 1 diode.

It belongs with the iot & wireless designs in this gallery.

From the project

Hardware PCB design project for IoT and Smarthome

Hardware PCB design project for IoT and Smarthome using Altium and KiCad

Main components on the ESP32ModuleDesign

ESP32-S3-WROOM-1AMS1117-3.3

ESP32ModuleDesign bill of materials (BOM)

14 components, 9 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
AMS1117-3.3
U2
2
Conn_01x19
J4, J5
2
SW_Push
SW1, SW2
1
D_Schottky_Filled
D1
2
10uf
C1, C2
1
100uf
C3
2
12k
R1, R3
2
470
R2, R4

ESP32ModuleDesign design files

The KiCad project lives in the harrymadison297/HW__IoT-Hardware-Design repository on GitHub; these links point at the commit this page was built from.

ESP32ModuleDesign: common questions

What microcontroller does the ESP32ModuleDesign use?

The ESP32ModuleDesign is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the ESP32ModuleDesign PCB?

The ESP32ModuleDesign measures 31 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32ModuleDesign?

14 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32ModuleDesign design files?

From the harrymadison297/HW__IoT-Hardware-Design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32ModuleDesign design in my own project?

The repository has no license, so all rights stay with harrymadison297. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32ModuleDesign without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in HW__IoT-Hardware-Design

Similar boards