Xiao ac ssr
HarryPehkonen·xiao-ac-ssr
About the Xiao ac ssr PCB
Xiao ac ssr is an open source ESP32 PCB design by HarryPehkonen, published on GitHub under the Unlicense license. It is a 2-layer board measuring 150 × 45 mm, with 14 components from 14 distinct parts.
Its main chip is the XIAO-ESP32C3 left D0..D6, from the ESP32 family. Other key parts include the MOC3063M. By type, the board carries 4 connectors, 2 capacitors, 2 resistors, 1 IC, 1 transistor and 1 fuse.
From the project
One-channel inline AC on/off switch (SSR) for the Seeed XIAO ESP32C3: generated KiCad schematic + PCB, zero-cross opto + snubberless triac, netlist/ERC/DRC gates
One-channel inline AC solid-state switch (on/off, no dimming) for a Seeed Studio XIAO ESP32C3 (or any XIAO on the same 14-pad footprint). Mains cord in one end, load socket out the other, and a zero-cross opto-triac driving a snubberless triac switches whatever is plugged in between them. Plug-in bench/room scale — not house wiring.
Same family as xiao-ac-dimmer: the whole mains front end, the XIAO sockets, the generator/router pipeline and the gates are copied; the switching element and everything that existed only to support dimming are replaced.
Main components on the Xiao ac ssr
Xiao ac ssr bill of materials (BOM)
14 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MOC3063M | DIP-6_W7.62mm | U2 |
| 1 | BTA16-600SW | TO-220-3_Vertical | Q1 |
| 1 | XIAO-ESP32C3 left D0..D6 | PinSocket_1x07_P2.54mm_Vertical | J1 |
| 1 | XIAO-ESP32C3 right 5V..D7 | PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | AC IN (cord) | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | AC OUT (load) | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | 3.15A | Fuseholder_Clip-5x20mm_Keystone_3512P_Inline_P23.62x7.27mm_D1.02x2.41x1.02x1.57mm_Horizontal | F1 |
| 1 | S14K150 | RV_Disc_D12mm_W4.5mm_P7.5mm | MOV1 |
| 1 | HLK-PM01 5V 0.6A | Converter_ACDC_Hi-Link_HLK-PMxx | PS1 |
| 1 | SS14 | D_DO-41_SOD81_P10.16mm_Horizontal | D5 |
| 1 | 470uF 16V | CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 150 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 360 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
Xiao ac ssr design files
The KiCad project lives in the HarryPehkonen/xiao-ac-ssr repository on GitHub; these links point at the commit this page was built from.
- Layoutxiao-ac-ssr.kicad_pcb
- Schematicxiao-ac-ssr.kicad_sch
Xiao ac ssr: common questions
What microcontroller does the Xiao ac ssr use?
The Xiao ac ssr is built around the XIAO-ESP32C3 left D0..D6, from the ESP32 family.
How big is the Xiao ac ssr PCB?
The Xiao ac ssr measures 150 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Xiao ac ssr?
14 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Xiao ac ssr design files?
From the HarryPehkonen/xiao-ac-ssr repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Xiao ac ssr design in my own project?
Yes, under the terms of its Unlicense license, which HarryPehkonen chose for the repository.
Can I test firmware for the Xiao ac ssr without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k