HardLabs

Sopdet

harshil21·PinPointer·kicad/sopdet/sopdet.kicad_pcb

Sopdet PCB layout, top view — open source board by harshil21

About the Sopdet PCB

Sopdet is an open source PCB design by harshil21, published on GitHub under the MIT license. It is a 4-layer board measuring 30.5 × 51.9 mm, with 44 components from 32 distinct parts.

Other key parts include the Power_Connector, AP63301WU-7, RFM95W-915S2, LC29H (DA) and Pi Zero 2W. By type, the board carries 16 capacitors, 12 resistors, 6 diodes, 5 ICs, 2 connectors and 2 inductors.

It belongs with the rf & radio designs in this gallery.

From the project

Personal rocket with GPS RTK + Radio Telemetry

This repository will contain all the components which I intend to use for the payload of my rocket. It will include but won't be limited to:

1) Original KiCAD designs for integrating Quectel's LC29H (DA) and (BS) GPS RTK modules 2) Custom Antenna(s) research, building, and tuning, for both GPS and radio telemetry to receive RTCM correction messages from my base station to the rocket. 3) CAD design for assembly of the antennas and modules into the rocket. 4) Microcontroller code (exact microcontroller TBD) which will communicate with an accelerometer (TBD), the GPS module, and a LoRA module…

Main components on the Sopdet

Power_ConnectorAP63301WU-7RFM95W-915S2LC29H (DA)Pi Zero 2W

Sopdet bill of materials (BOM)

44 components, 32 distinct parts.

QtyPartRefs
1
Power_Connector
U1
1
AP63301WU-7
U2
1
RFM95W-915S2
U3
1
LC29H (DA)
U4
1
Pi Zero 2W
U5
1
Q_PMOS_GSD
Q1
2
IPEX_MHF1
J1, J2
2
LED_Small
D1, D2
1
TVS
D3
1
Blue LED
D4
1
Yellow LED
D5
1
Orange LED
D6
1
6.8u
L1
1
68n
L2
1
10u
C1
4
0
C2, C3, C9, C10
1
100n
C4
1
47p
C5
2
22u
C6, C7
1
1000u
C8
Show 12 more
QtyPartRefs
2
100p
C11, C12
2
100n
C13, C15
1
10u
C14
1
33p
C16
2
0
R1, R5
1
2k
R2
1
158k
R3
1
30.1k
R4
1
10r
R6
2
1k
R7, R10
1
5.6k
R8
3
1k
R9, R11, R12

Sopdet design files

The KiCad project lives in the harshil21/PinPointer repository on GitHub; these links point at the commit this page was built from.

Sopdet: common questions

How big is the Sopdet PCB?

The Sopdet measures 30.5 × 51.9 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Sopdet?

44 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sopdet design files?

From the harshil21/PinPointer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Sopdet design in my own project?

Yes, under the terms of its MIT license, which harshil21 chose for the repository.

More boards in PinPointer

Similar boards