5 open source boards using the AP63301WU-7
Real designs built with the AP63301WU-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
2070-S-100-bus analyzer
johnwinans
254 × 134.6 mm91 parts4LNo license10ESP32
Speaker pod
MostlyBuilds
86.2 × 50.2 mm93 parts2LCC-BY-SA-4.01Sirius
harshil21
42.1 × 75.5 mm57 parts4LMIT1RP2040/RP2350
Phyduino pico2
perc-sw
68.6 × 53.3 mm152 parts4LGPL-3.00Sopdet
harshil21
30.5 × 51.9 mm44 parts4LMIT1
The AP63301WU-7 in open source designs
The gallery holds 5 open source boards using the AP63301WU-7 from 4 GitHub repositories; a typical one measures about 68.6 × 53.3 mm and carries around 91 components.
80% use four copper layers or more, and 80% carry an open source license.
The most starred is 2070-S-100-bus analyzer by johnwinans.
Microcontrollers on boards using the AP63301WU-7
What boards using the AP63301WU-7 are built for
AP63301WU-7: common questions
Where can I find a AP63301WU-7 reference design?
Each of the 5 boards on this page is a real design using the AP63301WU-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP63301WU-7 use?
Most are built on RP2040/RP2350 (2) and ESP32 (1).
How big is a typical board using the AP63301WU-7?
The median is 68.6 × 53.3 mm, and 20% are two-layer designs.
What is the most popular open source board using the AP63301WU-7?
By GitHub stars, 2070-S-100-bus analyzer by johnwinans, with 10 stars.
Can I simulate one of these boards using the AP63301WU-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.