Presence
haxeko·presence-pcb·hardware/c3_radar_r45.kicad_pcb
About the Presence PCB
Presence is an open source ESP32 PCB design by haxeko, published on GitHub. It is a 2-layer board measuring 45 × 45 mm, with 22 components from 15 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the AP2112K-3.3. By type, the board carries 8 capacitors, 7 resistors, 2 ICs, 1 connector, 1 fuse and 1 switch.
It belongs with the iot & wireless designs in this gallery.
From the project
Phiên bản Ø45 của cảm biến hiện diện. ESP32-C3 và radar đặt cạnh nhau, không xếp chồng, để tối ưu sóng WiFi và tản nhiệt. Mạch điện giữ nguyên bản Ø30: USB-C chỉ lấy nguồn 5 V, LDO AP2112K-3.3, pad nạp, nút RESET.
Phiên bản Ø45 của cảm biến hiện diện. ESP32-C3 và radar đặt cạnh nhau, không xếp chồng, để tối ưu sóng WiFi và tản nhiệt. Mạch điện giữ nguyên bản Ø30: USB-C chỉ lấy nguồn 5 V, LDO AP2112K-3.3, pad nạp, nút RESET.
- Mở hardware/c3radarr45.kicadpro. Project tạo bằng KiCad 7.0.11, mở được bằng KiCad 8/9/10 (KiCad sẽ hỏi nâng cấp định dạng file). - Thư viện riêng đi kèm trong hardware/: c3radarr45.kicadsym và c3radarr45.pretty/. - Symbol và footprint liên kết theo UUID. Chạy Update PCB from Schematic sẽ không phát sinh thay đổi. - H1/H2 là lỗ bắt vít chỉ có trên PCB (đánh dấu board only), không…

Main components on the Presence
Presence bill of materials (BOM)
22 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02-N4 | ESP32-C3-WROOM-02 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | USB-C 6P (power only) | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
| 1 | PTC 0.5A | Fuse_0805_2012Metric | F1 |
| 1 | HLK-LD2410C | HLK-LD2410C_1x05_P2.54mm | RD1 |
| 1 | RESET | SW_SPST_B3U-1000P | SW1 |
| 1 | SMF5.0A | D_SOD-123F | D1 |
| 1 | 22UF 22uF | C_0805_2012Metric | C1 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C2 |
| 3 | 10UF 10uF | C_0805_2012Metric | C3, C4, C7 |
| 2 | 100NF 100nF | C_0603_1608Metric | C5, C8 |
| 1 | 1UF 1uF | C_0603_1608Metric | C6 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 4 | 10K 10k | R_0603_1608Metric | R3, R4, R5, R6 |
| 1 | 100K 100k | R_0603_1608Metric | R7 |
Presence design files
The KiCad project lives in the haxeko/presence-pcb repository on GitHub; these links point at the commit this page was built from.
Presence: common questions
What microcontroller does the Presence use?
The Presence is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the Presence PCB?
The Presence measures 45 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Presence?
22 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Presence design files?
From the haxeko/presence-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Presence design in my own project?
The repository has no license, so all rights stay with haxeko. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Presence without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k