Nixie Clock 1 0

haXoru5·nixie_clock·Nixie_KiCad/Nixie_Clock_1_0.kicad_pcb

Nixie Clock 1 0 PCB layout, top view — open source AVR/Arduino board by haXoru5

About the Nixie Clock 1 0 PCB

Nixie Clock 1 0 is an open source AVR/Arduino PCB design by haXoru5, published on GitHub. It is a 2-layer board measuring 140 × 60 mm, with 22 components from 11 distinct parts.

Its main chip is the Arduino_Nano_Every, from the AVR/Arduino family. Other key parts include the K155ID1, IN-14, IN-3, L7812CV and PS_V2H. By type, the board carries 12 ICs, 9 resistors and 1 module.

It belongs with the displays & leds and power & battery designs in this gallery.

From the project

Clock built using Arduino Nano Every and IN-14 Nixie tubes

Retro style clock built using an Arduino and IN-14 Nixie tubes

IN-14 Nixie Tube IN-3 Nixie Tube High Voltage Power Supply K155ID1 BCD Decoder IC

DS3231 RTC DIP Sockets Female PCB Headers

L7812CV 12V Voltage Regulator NJM78M05FA 5V Voltage Regulator 1/4W THT Resistors SMT Capacitors

Nixie Clock 1 0, from the project README
From the project README

Main components on the Nixie Clock 1 0

Nixie Clock 1 0 bill of materials (BOM)

22 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
K155ID1
U1, U3, U5, U10
3
IN-14
U2, U4, U11
1
IN-3
U6
1
L7812CV
PS_V2H
U7
1
PS_V2H
K155ID1
U8
1
IN-14
U9
1
K155ID1
DS3231
U12
1
Arduino_Nano_Every
A1
7
10K
10k
R1, R2, R4, R5, R6, R8, R9
1
100K
100k
R3
1
5K1
5k1
R7

Nixie Clock 1 0 design files

The KiCad project lives in the haXoru5/nixie_clock repository on GitHub; these links point at the commit this page was built from.

Nixie Clock 1 0: common questions

What microcontroller does the Nixie Clock 1 0 use?

The Nixie Clock 1 0 is built around the Arduino_Nano_Every, from the AVR/Arduino family.

How big is the Nixie Clock 1 0 PCB?

The Nixie Clock 1 0 measures 140 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nixie Clock 1 0?

22 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Nixie Clock 1 0 design files?

From the haXoru5/nixie_clock repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Nixie Clock 1 0 design in my own project?

The repository has no license, so all rights stay with haXoru5. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Nixie Clock 1 0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in nixie_clock

Similar boards