15 open source boards using the K155ID1

Real designs built with the K155ID1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the K155ID1

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the K155ID1 connects to, and the resistors, capacitors and other passives placed on it.

VCCpin 5Connected to: 5V 92%
GNDpin 12Connected to: GND 100%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nixie clock by shengwen-tw, Nixiesp12 by laurivosandi, NixieNTPClock by bastian-bou and 4IN14NixieShield by NEONTEC75.

The K155ID1 in open source designs

The gallery holds 15 open source boards using the K155ID1 from 13 GitHub repositories; a typical one measures about 160 × 60 mm and carries around 44 components.

87% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Nixie control board by shengwen-tw.

Parts used alongside the K155ID1

Microcontrollers on boards using the K155ID1

K155ID1: common questions

Where can I find a K155ID1 reference design?

Each of the 15 boards on this page is a real design using the K155ID1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the K155ID1 use?

Most are built on AVR/Arduino (4), ESP32 (2), ESP8266 (1) and Raspberry Pi (1).

How big is a typical board using the K155ID1?

The median is 160 × 60 mm, and 87% are two-layer designs.

What is the most popular open source board using the K155ID1?

By GitHub stars, Nixie control board by shengwen-tw, with 9 stars.

Can I simulate one of these boards using the K155ID1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part