Rak4630-solar
About the Rak4630-solar PCB
Rak4630-solar is an open source PCB design by haydenkz, published on GitHub. It is a 2-layer board measuring 58.1 × 91.3 mm, with 45 components from 28 distinct parts.
Other key parts include the RAK4630-8-SM-I, SGM41513YTQF24G/TR, XC6206P332MR, MCP65R41 and TPS22917. By type, the board carries 16 capacitors, 16 resistors, 5 ICs, 3 diodes, 1 connector and 1 battery holder.
It belongs with the power & battery and rf & radio designs in this gallery.
From the project
Solar-powered MeshCore node PCB built around the RAK4630-8-SM-I (nRF52840 + SX1262 LoRa) module.
Main components on the Rak4630-solar
Rak4630-solar bill of materials (BOM)
45 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RAK4630-8-SM-I RAK(瑞科慧联) | C32315253_COMM-SMD_44P-L23_0-W15_0-P1_20_RAK4630-8-SM-I | U1 |
| 1 | SGM41513YTQF24G/TR SGMICRO(圣邦微) | C5153778_TQFN-24_L4_0-W4_0-P0_50-BL-EP2_6 | U2 |
| 1 | XC6206P332MR Torex Semicon | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U3 |
| 1 | MCP65R41 Microchip Tech | SOT-23-6 | U4 |
| 1 | TPS22917 Texas Instruments | SOT-23-6 | U5 |
| 1 | PH2.0-2P-LT CAX(创都) | C722761_CONN-SMD_PH2_0-1X2PW | P1 |
| 1 | BH-18650-B1BA002 MYOUNG | BatteryHolder_MYOUNG_BH-18650-B1BA002_1x18650 | BT1 |
| 1 | Tactile Button, 160gf XUNPU | SW_TS-1088-AR02016 | SW1 |
| 1 | TYPE-C-31-M-12 韩国韩荣 | C165948_USB-C_SMD-TYPE-C-31-M-12_1 | USBC1 |
| 2 | SS34 MDD（Microdiode Electronics） | D_SMA | D1, D2 |
| 1 | 1N4148W ST(Semtech) | D_SOD-123 | D3 |
| 1 | FNR3015S1R0MT cjiang(长江微电) | C167743_IND-SMD_L3_0-W3_0_FNR30XXS | L1 |
| 1 | 47nF Samsung Electro-Mechanics | C_0805 | C1 |
| 5 | 10uF Samsung Electro-Mechanics | C_0805 | C2, C4, C5, C6, C7 |
| 2 | 4.7uF Samsung Electro-Mechanics | C_0805 | C3, C12 |
| 6 | 100nF Samsung Electro-Mechanics | C_0805 | C8, C9, C10, C15, C16, C17 |
| 2 | 1uF Samsung Electro-Mechanics | C_0805 | C11, C13 |
| 3 | 5.1kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R1, R2, R6 |
| 1 | 2.2kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R3 |
| 4 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R4, R5, R8, R16 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NTCG103JF103FT1 TDK | C209959_R0402 | R7 |
| 1 | 27kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R9 |
| 1 | 1MΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R10 |
| 1 | 1.5MΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R11 |
| 1 | 390kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R12 |
| 1 | 200kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R13 |
| 1 | 3MΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R14 |
| 1 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0805 | R15 |
Rak4630-solar design files
The KiCad project lives in the haydenkz/rak4630-solar-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutmeshcore-solar.kicad_pcb
- Schematicmeshcore-solar.kicad_sch
Rak4630-solar: common questions
How big is the Rak4630-solar PCB?
The Rak4630-solar measures 58.1 × 91.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rak4630-solar?
45 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rak4630-solar design files?
From the haydenkz/rak4630-solar-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rak4630-solar design in my own project?
The repository has no license, so all rights stay with haydenkz. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k