DNMS-RPI-HAT-V1.0
About the DNMS-RPI-HAT-V1.0
DNMS-RPI-HAT-V1.0 is an open source PCB design by hbitter, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 65 × 30 mm, with 13 components from 10 distinct parts.
Other key parts include the P82B715P and P82B715DR. By type, the board carries 7 connectors, 2 ICs, 2 capacitors and 2 resistors.
It belongs with the sensors, dev boards & breakouts and test & measurement designs in this gallery.
From the project
Digital Noise Measurement Sensor
PCB Versions Historie: - ICS-43434-PCB-V1.3 - erste veröffentlichte Version - ICS-43434-PCB-V1.4 - Durchmesser für die akustische Öffnung geändert con 0,6mm auf 0,7mm
PCB Versions Historie: - Airrohr-V1.1 - erste Version - Airrohr-V1.2 - I²C-Bus Verlängerung mit zusätzlicher RJ-12 (Modular Jack) 6P/6C Buchse - Airrohr-V1.4 - RJ12 Buchse nun für zwei unterschiedliche "Footprints" und in der Ausrichtung geändert - einige Bauelemente nach innen verschoben, damit der Einbau in ein Gehäuse (Rohr) einfacher ist - P82B715 (I²C-bus Extender IC) kann im DIP8 Gehäuse oder im SO8 Gehäuse bestückt…
Main components on the DNMS-RPI-HAT-V1.0
DNMS-RPI-HAT-V1.0 bill of materials (BOM)
13 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | P82B715P P82B715PN,112 Texas Instruments | P82B715 DIP8 | U1 |
| 1 | P82B715DR Texas Instruments | SOIC8 | U2 |
| 1 | 2222 Conn_02x20_Odd_Even Adafruit | PinSocket_2x20_P2.54mm_Vertical_Centered_Anchor | J1 |
| 1 | SS-90000-003 RJ12 Stewart Connector / Bel | 54601906WPLF | J2 |
| 1 | E5566-Q0LK22-L RJ12 Pulse Electronics | E5566Q0LK22L | J3 |
| 1 | Conn_01x05 JST | JST_ZH_S5B-EH_1x05_P1.50mm_Horizontal | J4 |
| 2 | G800W304018EU Conn_01x04_Pin A+D10:P10mphenol Commercial Products | PinHeader_1x04_P2.54mm_Vertical | J6, J7 |
| 1 | 50500020134G Screw_Terminal_01x02 PTR | TerminalBlock_1x02_P2,54mm_P5.08mm_Horizontal | J8 |
| 2 | K104K15X7RF53H5L 100nF Vishay | C_THT_100nF_L9.0mm_W2.0mm_P5.00mm_P7.50mm | C1, C2 |
| 2 | CCF07330RJKE36 330 Vishay | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
DNMS-RPI-HAT-V1.0 design files
The KiCad project lives in the hbitter/DNMS repository on GitHub; these links point at the commit this page was built from.
DNMS-RPI-HAT-V1.0: common questions
How big is the DNMS-RPI-HAT-V1.0?
The DNMS-RPI-HAT-V1.0 measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DNMS-RPI-HAT-V1.0?
13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DNMS-RPI-HAT-V1.0 design files?
From the hbitter/DNMS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DNMS-RPI-HAT-V1.0 design in my own project?
Yes, under the terms of its GPL-3.0 license, which hbitter chose for the repository.
More boards in DNMS
Airrohr
68.6 × 71.1 mm22 parts2LGPL-3.088
IM72D128-Tube
130 × 11 mm21 parts2LGPL-3.088
NXPDNMS - Digital Noise Maesurement Sensor
131.1 × 19.2 mm16 parts2LGPL-3.088
NXPProPrj DNMS TEENSY 2025-10-10
90 × 18.5 mm12 parts2LGPL-3.088
IM72D128
11.3 × 11.3 mm8 parts2LGPL-3.088
ICS-43434
11.3 × 11.3 mm4 parts2LGPL-3.088
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k