11 open source boards using the P82B715DR
Real designs built with the P82B715DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Airrohr
hbitter
68.6 × 71.1 mm22 parts2LGPL-3.088CyCompute
M2I-HABET
230 × 70 mm29 parts2LNo license3Airrohr
marcosmarf
68.6 × 71.1 mm22 parts2LCustom license1Isolated Multi-Rail Power Supply Monitor Sensor Board
capotosto
108 × 101.6 mm136 parts6LNo license0Adapter hybrid assistor
dorotheapfeiffer
68.6 × 76.7 mm36 parts6LBSD-2-Clause0NXP
DNMS - Digital Noise Maesurement Sensor
marcosmarf
131.1 × 19.2 mm16 parts2LCustom license1Isolated Multi-Rail Power Supply Monitor Arduino Shield Board
capotosto
106 × 80 mm74 parts4LNo license0Adapter hybrid assistor hpc 3HDMI
dorotheapfeiffer
69 × 76.5 mm35 parts6LBSD-2-Clause0NXP
DNMS - Digital Noise Maesurement Sensor
hbitter
131.1 × 19.2 mm16 parts2LGPL-3.088Adapter hybrid assistor hpc 2HDMI
dorotheapfeiffer
69 × 76.5 mm23 parts4LBSD-2-Clause0DNMS-RPI-HAT-V1.0
hbitter
65 × 30 mm13 parts2LGPL-3.088
How designs wire the P82B715DR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the P82B715DR connects to, and the resistors, capacitors and other passives placed on it.
- The SX pin has a pull-up to 3.3V on 4 of 5 designs, most often 4.7 kΩ.
- The SY pin has a pull-up to 3.3V on 4 of 5 designs, most often 4.7 kΩ.
- The LX pin has a pull-up to 3.3V on 3 of 5 designs, most often 330 Ω (then 4.7 kΩ).
- The LY pin has a pull-up to 3.3V on 3 of 5 designs, most often 330 Ω (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 5 | Connected to: Not connected 100% | — |
| LXpin 2 | Connected to: A connector 100%, P82B715P 40% |
|
| SXpin 3 | Connected to: P82B715P 40%, a connector 40% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| SYpin 6 | Connected to: P82B715P 40%, a connector 40% |
|
| LYpin 7 | Connected to: A connector 100%, P82B715P 40% |
|
| VCCpin 8 | Connected to: 3.3V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DNMS - Digital Noise Maesurement Sensor by hbitter, CyCompute by M2I-HABET, Airrohr pcb by marcosmarf and Isolated Multi-Rail Power Supply Monitor Arduino Shield Board by capotosto.
The P82B715DR in open source designs
The gallery holds 11 open source boards using the P82B715DR from 5 GitHub repositories; a typical one measures about 69 × 71.1 mm and carries around 23 components.
55% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.
The most starred is Airrohr pcb by hbitter.
Parts used alongside the P82B715DR
Microcontrollers on boards using the P82B715DR
What boards using the P82B715DR are built for
P82B715DR: common questions
Where can I find a P82B715DR reference design?
Each of the 11 boards on this page is a real design using the P82B715DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the P82B715DR SX pin?
The SX pin has a pull-up to 3.3V on 4 of 5 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 5 open source designs using the P82B715DR.
What pull-up resistor is used on the P82B715DR SY pin?
The SY pin has a pull-up to 3.3V on 4 of 5 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 5 open source designs using the P82B715DR.
What pull-up resistor is used on the P82B715DR LX pin?
The LX pin has a pull-up to 3.3V on 3 of 5 designs, most often 330 Ω (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the P82B715DR.
Which microcontrollers do boards using the P82B715DR use?
Most are built on NXP (2).
How big is a typical board using the P82B715DR?
The median is 69 × 71.1 mm, and 55% are two-layer designs.
What is the most popular open source board using the P82B715DR?
By GitHub stars, Airrohr pcb by hbitter, with 88 stars.
Can I simulate one of these boards using the P82B715DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.