Custom eval stm32L43KCU6
hedfd434·custom_eval_stm32L43KCU6·stm32l432kcu6_eval/stm32l432kcu6_eval.kicad_pcb
About the Custom eval stm32L43KCU6 PCB
Custom eval stm32L43KCU6 is an open source STM32 PCB design by hedfd434, published on GitHub. It is a 4-layer board measuring 27.4 × 53 mm, with 35 components from 19 distinct parts.
Its main chip is the STM32L432KCUx, from the STM32 family. Other key parts include the USBLC6-2SC6 and XC6206PxxxMR. By type, the board carries 11 capacitors, 8 resistors, 4 connectors, 3 ICs, 3 switches and 2 crystals.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
custom evaluation board for stm32L432KCu6
This is a project of the custom evalution board for stm32L432KCU6. The eval board was created for future test and prototypin during "2025/26 can-sat 🛰️ competition" organisated by ESA 🇪🇺 (European Space Agency), simultaneously it is a part of our PDR report 📑 (Preeliminary Desing Report). By creating this board we want to show our capabilities in terms of electronics manufacturing ⚡📟.

Main components on the Custom eval stm32L43KCU6
Custom eval stm32L43KCU6 bill of materials (BOM)
35 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | XC6206PxxxMR | SOT-23-3 | U2 |
| 1 | STM32L432KCUx | QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm_ThermalVias | U3 |
| 1 | ASFL1-40.000MHZ-EC-T | ASFL1 | Y1 |
| 1 | FC-135 32.7680KA-A3 FC-135_32.7680KA-A3_12_5_pF | FC-135_32_7680KA-A3 | Y2 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J1 |
| 2 | Conn_01x20_Pin | PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | 250mA | Fuse_0603_1608Metric | F1 |
| 3 | B3U-1000PM | B3U1000PM_3D_MODEL | S1, S2, S3 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 1 | value | L_0603_1608Metric | FB1 |
| 7 | 100nF | C_0603_1608Metric | C1, C2, C3, C8, C9, C10, C11 |
| 2 | 20pF | C_0402_1005Metric | C4, C5 |
| 1 | 4.7uF | C_0603_1608Metric | C6 |
| 1 | 1uF | C_0603_1608Metric | C7 |
| 5 | 0ohm | R_0603_1608Metric | R1, R2, R3, R5, R8 |
| 2 | 1K | R_0603_1608Metric | R4, R6 |
| 1 | 10K | R_0603_1608Metric | R7 |
Custom eval stm32L43KCU6 design files
The KiCad project lives in the hedfd434/custom_eval_stm32L43KCU6 repository on GitHub; these links point at the commit this page was built from.
Custom eval stm32L43KCU6: common questions
What microcontroller does the Custom eval stm32L43KCU6 use?
The Custom eval stm32L43KCU6 is built around the STM32L432KCUx, from the STM32 family.
How big is the Custom eval stm32L43KCU6 PCB?
The Custom eval stm32L43KCU6 measures 27.4 × 53 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Custom eval stm32L43KCU6?
35 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Custom eval stm32L43KCU6 design files?
From the hedfd434/custom_eval_stm32L43KCU6 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Custom eval stm32L43KCU6 design in my own project?
The repository has no license, so all rights stay with hedfd434. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Custom eval stm32L43KCU6 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k