Load Cell Ground Systems

HelloItzAlex·KiCAD-Designs·Load Cell Ground Systems/Load Cell Ground Systems.kicad_pcb

Load Cell Ground Systems PCB layout, top view — open source board by HelloItzAlex

About the Load Cell Ground Systems PCB

Load Cell Ground Systems is an open source PCB design by HelloItzAlex, published on GitHub. It is a 2-layer board measuring 57.2 × 57.2 mm, with 8 components from 8 distinct parts.

Other key parts include the TLP241A(D4,F and Adafruit_Feather_HUZZAH32_ESP32. By type, the board carries 3 connectors, 3 resistors, 1 IC and 1 module.

Main components on the Load Cell Ground Systems

Load Cell Ground Systems bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TLP241A(D4,F
TLP241A_D4,F
IC1
1
Adafruit_Feather_HUZZAH32_ESP32
A1
1
TBL009V-254-08GY-2GY
J1
1
Conn_01x02_Socket
J2
1
24VCONN
Conn_01x10_Socket
J3
1
1.1K
100k
R1
1
1.1K
27k
R2
1
1.1K
250
R3

Load Cell Ground Systems design files

The KiCad project lives in the HelloItzAlex/KiCAD-Designs repository on GitHub; these links point at the commit this page was built from.

Load Cell Ground Systems: common questions

How big is the Load Cell Ground Systems PCB?

The Load Cell Ground Systems measures 57.2 × 57.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Load Cell Ground Systems?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Load Cell Ground Systems design files?

From the HelloItzAlex/KiCAD-Designs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Load Cell Ground Systems design in my own project?

The repository has no license, so all rights stay with HelloItzAlex. Use it as a reference, and ask the author before reusing the design.

More boards in KiCAD-Designs