9 open source boards using the Adafruit_Feather_HUZZAH32_ESP32
Real designs built with the Adafruit_Feather_HUZZAH32_ESP32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP-Marauder
R09Aditya
72 × 154.5 mm10 parts2LNo license2Air purifier
harrisonhsueh
207 × 108 mm150 parts4LNo license0Keyboard
DiScarlet
264.8 × 109.2 mm105 parts2LNo license0Effect pedal
Ahreo
104.8 × 97.8 mm85 parts2LNo license0Weather-App-Display
JorgeDeLosRazo
33.9 × 82.4 mm23 parts2LNo license0Distance Sensor
mourir09
87 × 84.5 mm11 parts2LNo license0411
mourir09
94 × 41.2 mm8 parts2LNo license0Load Cell Ground Systems
HelloItzAlex
57.2 × 57.2 mm8 parts2LNo license1Load Cell Ground Systems STM32
HelloItzAlex
57.2 × 57.2 mm8 parts2LNo license1
How designs wire the Adafruit_Feather_HUZZAH32_ESP32
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the Adafruit_Feather_HUZZAH32_ESP32 connects to, and the resistors, capacitors and other passives placed on it.
- The RESET pin is left unconnected on 6 of 7 designs.
- The EN pin is left unconnected on 6 of 7 designs.
- The VBAT pin is left unconnected on 6 of 7 designs.
- The I34/A2 pin is left unconnected on 5 of 7 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESETpin 1 | Connected to: Not connected 86% | — |
| NCpin 3 | Connected to: Not connected 100% | — |
| I34/A2pin 7 | Connected to: Not connected 71% · a signal 29% | — |
| I39/A3pin 8 | Connected to: Not connected 71% · a signal 29% | — |
| ENpin 27 | Connected to: Not connected 86% | — |
| VBATpin 28 | Connected to: Not connected 86% | — |
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP-Marauder by R09Aditya, Load Cell Ground Systems by HelloItzAlex, Effect pedal by Ahreo and Keyboard by DiScarlet.
The Adafruit_Feather_HUZZAH32_ESP32 in open source designs
The gallery holds 9 open source boards using the Adafruit_Feather_HUZZAH32_ESP32 from 7 GitHub repositories; a typical one measures about 87 × 84.5 mm and carries around 11 components.
89% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is ESP-Marauder by R09Aditya.
What boards using the Adafruit_Feather_HUZZAH32_ESP32 are built for
Adafruit_Feather_HUZZAH32_ESP32: common questions
Where can I find a Adafruit_Feather_HUZZAH32_ESP32 reference design?
Each of the 9 boards on this page is a real design using the Adafruit_Feather_HUZZAH32_ESP32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the Adafruit_Feather_HUZZAH32_ESP32 RESET pin connected?
The RESET pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the Adafruit_Feather_HUZZAH32_ESP32.
How is the Adafruit_Feather_HUZZAH32_ESP32 EN pin connected?
The EN pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the Adafruit_Feather_HUZZAH32_ESP32.
How is the Adafruit_Feather_HUZZAH32_ESP32 VBAT pin connected?
The VBAT pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the Adafruit_Feather_HUZZAH32_ESP32.
How big is a typical board using the Adafruit_Feather_HUZZAH32_ESP32?
The median is 87 × 84.5 mm, and 89% are two-layer designs.
What is the most popular open source board using the Adafruit_Feather_HUZZAH32_ESP32?
By GitHub stars, ESP-Marauder by R09Aditya, with 2 stars.
Can I simulate one of these boards using the Adafruit_Feather_HUZZAH32_ESP32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.