AGS Solenoid Breakout D9
About the AGS Solenoid Breakout D9
AGS Solenoid Breakout D9 is an open source PCB design by HelloItzAlex, published on GitHub. It is a 2-layer board measuring 50.8 × 63.5 mm, with 18 components from 3 distinct parts.
By type, the board carries 8 diodes, 8 resistors and 2 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
AGS Solenoid Breakout D9 bill of materials (BOM)
18 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TBLH10V-350-08BK SOL. CHANS. | RHDR16W80P550X350_2X8_2870X850X1420P | J2, J3 |
| 8 | 1N4004 | D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
AGS Solenoid Breakout D9 design files
The KiCad project lives in the HelloItzAlex/KiCAD-Designs repository on GitHub; these links point at the commit this page was built from.
AGS Solenoid Breakout D9: common questions
How big is the AGS Solenoid Breakout D9?
The AGS Solenoid Breakout D9 measures 50.8 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AGS Solenoid Breakout D9?
18 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AGS Solenoid Breakout D9 design files?
From the HelloItzAlex/KiCAD-Designs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AGS Solenoid Breakout D9 design in my own project?
The repository has no license, so all rights stay with HelloItzAlex. Use it as a reference, and ask the author before reusing the design.
More boards in KiCAD-Designs
NI-9205 Breakout v2.0
190.5 × 279.4 mm193 parts2LNo license1
2025-2026 NI Breakout Board
190.5 × 279.4 mm193 parts2LNo license1
STM32OBC-Attempt-2 Matcha 2 Layer 1
57.2 × 101.6 mm71 parts2LNo license1
ESP32Constellation Stack V3.0
57.2 × 57.2 mm67 parts4LNo license1
STM32OBC-Attempt-1 Matcha 4 Layer
44.5 × 57.2 mm65 parts4LNo license1
STM32OBC-Attempt-5 Matcha 2 Layer 3
57.2 × 57.2 mm55 parts2LNo license1
STM32DeploymentBoardV2.0
20.3 × 31.8 mm46 parts4LNo license1
STM32Memory Board
29.9 × 38.1 mm34 parts4LNo license1
Constellation Saddle V1.2
95.3 × 95.3 mm29 parts2LNo license1
Load Cell Ground Systems
57.2 × 57.2 mm8 parts2LNo license1
Load Cell Ground Systems STM32
57.2 × 57.2 mm8 parts2LNo license1
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979