Datamskinprosjekt
Henryen-cyber·Datamskinprosjekt·PCB/TripSitter/TripSitter.kicad_pcb
About the Datamskinprosjekt PCB
Datamskinprosjekt is an open source FPGA PCB design by Henryen-cyber, published on GitHub. It is a 4-layer board measuring 210.7 × 85 mm, with 183 components from 66 distinct parts.
Its main chip is the XC7A100T-FGG484, from the FPGA family. Other key parts include the MT25QL256ABA1EW9-0SIT, IP4220CZ6, TPS54325_PWP_14, DSC1001DL5-100.0000T and TPS54294PWP. By type, the board carries 95 capacitors, 53 resistors, 12 ICs, 9 connectors, 6 switches and 4 inductors.
From the project
Hex for MCU are packaged in the Github releases.
Hex for MCU are packaged in the Github releases.
When working on a KiCAD File ALWAYS update this table to state that you are working on it
Main components on the Datamskinprosjekt
Datamskinprosjekt bill of materials (BOM)
183 components, 66 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT25QL256ABA1EW9-0SIT | SON127P800X600X80-9N-D | IC1 |
| 1 | IP4220CZ6 | SC-74-6_1.5x2.9mm_P0.95mm | IC701 |
| 1 | XC7A100T-FGG484 | Xilinx_FGG484 | U1 |
| 1 | TPS54325_PWP_14 | PWP14_2P31X2P46 | U2 |
| 1 | DSC1001DL5-100.0000T | CDFN4_2P5X2_MCH-L | U4 |
| 1 | TPS54294PWP | PWP16_2P31X2P46 | U5 |
| 4 | IS62WVS2568FBLL-20NLI | SOIC-8_3.9x4.9mm_P1.27mm | U6, U202, U501, U502 |
| 1 | TPD12S520DBT | TSSOP-38_4.4x9.7mm_P0.5mm | U7 |
| 1 | EFM32GG11B420F2048GQ100 | TQFP-100_14x14mm_P0.5mm | U201 |
| 1 | 48MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y201 |
| 1 | FTSH-110-01-L-DV-007 | SAMTEC_FTSH-110-01-L-DV-007 | J1 |
| 1 | USB_B_Micro | USB_Micro-B_GCT_USB3076-30-A | J3 |
| 1 | Conn_02x07_Odd_Even | PinHeader_2x07_P2.54mm_Vertical_SMD | J4 |
| 1 | Conn_02x04_Counter_Clockwise | PinHeader_2x04_P2.00mm_Vertical | J5 |
| 1 | EFM32_PinHeader_PortE | PinHeader_2x06_P1.00mm_Vertical | J6 |
| 1 | HDMI_A_1.4 | HDMI_A_Molex_208658-1001_Horizontal | J7 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.00mm_Vertical | J801 |
| 1 | Jack-DC | BarrelJack_CUI_PJ-063AH_Horizontal_CircularHoles | J802 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521_CircularHoles | J803 |
| 1 | SW_Push_Open | SW_Push_SPST_NO_Alps_SKRK | SW1 |
Show 46 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | SW_Push | SW_SPST_Omron_B3FS-100xP | SW201, SW202, SW203, SW204 |
| 1 | SW_DPDT_x2 | SW_E-Switch_EG1224_SPDT_Angled | SW801 |
| 1 | D | D_0201_0603Metric_Pad0.64x0.40mm_HandSolder | D1 |
| 2 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D401, D402 |
| 1 | 2.2uH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L3 |
| 1 | CBF221HC | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L4 |
| 2 | 1.5uH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L801, L802 |
| 7 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C803, C805, C811, C812, C815, C817 |
| 3 | 47uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10, C32 |
| 7 | 470nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13, C14, C15, C25, C26, C27, C30 |
| 3 | 4.7uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C28, C29, C31 |
| 2 | 100uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C33, C801 |
| 1 | 330uF | CP_EIA-7343-43_Kemet-X_Pad2.25x2.55mm_HandSolder | C34 |
| 6 | 4.7uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C35, C46, C47, C48, C49, C50 |
| 3 | 47uF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C36, C39, C501 |
| 6 | 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37, C38, C40, C41, C502, C503 |
| 20 | 470nF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C42, C43, C44, C45, C51, C52, C53, C54 +12 |
| 1 | 100nF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C86 |
| 1 | 1nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C98 |
| 8 | 0.1uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C100, C101, C102, C103, C104, C105, C509, C510 |
| 5 | 10uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C201, C214, C802, C810, C816 |
| 11 | 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C202, C203, C204, C205, C206, C212, C213, C215 +3 |
| 3 | 1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C210, C813, C814 |
| 1 | 1uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C211 |
| 1 | 3.3nF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C804 |
| 6 | 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C806, C807, C808, C809, C818, C819 |
| 6 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R23, R24, R31, R32 |
| 1 | 2.4k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 3 | 4k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R6, R8 |
| 3 | 1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R7, R9 |
| 3 | 2k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R12, R14 |
| 3 | 510 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R13, R15 |
| 1 | 1M | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 2 | 100 | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R17, R18 |
| 8 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21, R29, R33, R203, R205, R207, R209 |
| 1 | 27k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30 |
| 4 | 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R35, R36, R37 |
| 1 | 330k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R38 |
| 2 | 15R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39, R40 |
| 3 | 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R201, R804, R807 |
| 4 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R202, R204, R206, R208 |
| 2 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R401, R402 |
| 1 | 30.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R801 |
| 3 | 22.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R802, R803, R805 |
| 1 | 73.2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R806 |
| 1 | 6.81k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R808 |
Datamskinprosjekt design files
The KiCad project lives in the Henryen-cyber/Datamskinprosjekt repository on GitHub; these links point at the commit this page was built from.
Datamskinprosjekt: common questions
What microcontroller does the Datamskinprosjekt use?
The Datamskinprosjekt is built around the XC7A100T-FGG484, from the FPGA family.
How big is the Datamskinprosjekt PCB?
The Datamskinprosjekt measures 210.7 × 85 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Datamskinprosjekt?
183 components, from 66 distinct parts. The full bill of materials is listed on this page.
Where can I download the Datamskinprosjekt design files?
From the Henryen-cyber/Datamskinprosjekt repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Datamskinprosjekt design in my own project?
The repository has no license, so all rights stay with Henryen-cyber. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Datamskinprosjekt without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765