13 open source boards using the XC7A100T-FGG484
Real designs built with the XC7A100T-FGG484, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Lesonar2 beamforming rx hardware
tornyol
144.7 × 92.3 mm914 parts6LAGPL-3.0112- schematic only · 121 partsFPGA
Artix dc scm
antmicro
121 partsApache-2.071 FPGA
ArtixDevBoard
RasmusStagsted
92.5 × 80.9 mm300 parts4LNo license4FPGA
Artix-7-FPGA-Dev-Board
LZajmi
117.3 × 121.3 mm360 parts8LCustom license3FPGA
RPi-HwAB
prestofuoco
65 × 56 mm137 parts8LMIT1FPGA
Datamskinprosjekt
Henryen-cyber
210.7 × 85 mm183 parts4LNo license0FPGA
FD.02-01-2021
Jegeva
100 × 139 mm274 parts1LNo license0FPGA
FD new testblock2
Jegeva
100 × 139 mm273 parts1LNo license0FPGA
FD
Jegeva
100 × 139 mm270 parts6LNo license0FPGA
FD-checkver
Jegeva
100 × 139 mm270 parts1LNo license0FPGA
FD2
Jegeva
112 × 158 mm263 parts4LNo license0FPGA
FD3
Jegeva
112 × 158 mm259 parts4LNo license0FPGA
FD-TUNEDDDR+TERM@x+500
Jegeva
112 × 158 mm239 parts1LNo license0
How designs wire the XC7A100T-FGG484
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the XC7A100T-FGG484 connects to, and the resistors, capacitors and other passives placed on it.
- The VCCO_16 pins have a decoupling capacitor on 6 of 6 designs, most often 470 nF (then 100 nF).
- The VCCO_34 pins have a decoupling capacitor on 5 of 6 designs, most often 470 nF (then 4.7 µF).
- The VCCO_35 pins have a decoupling capacitor on 5 of 6 designs, most often 470 nF (then 220 nF).
- The MGTREFCLK1N_216 pin is left unconnected on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin A2, A3, A5, A7, A9, A11, A12, A22, AA2, AA12, AA22, AB9, AB19, B3, B12, B19, C3, C6, C10, C12, C16, D3, D4, D8, D12, D13, E4, E5, E7, E9, E11, E20, F5 | Connected to: GND 100% | — |
| MGTPTXN0_216pin A4 | Connected to: Signal 67% · not connected 33% |
|
| MGTPTXN2_216pin A6 | Connected to: Not connected 67% · a signal 33% |
|
| VCCO_16pin A17, B14, C21, D18, E15 | Connected to: 3.3V 100% |
|
| VCCO_34pin AA7, AB4 | Connected to: 3.3V 83% · a signal 17% |
|
| IO_L8P_T1_13pin AA9 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L9P_T1_DQS_13pin AA10 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L9N_T1_DQS_13pin AA11 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L3P_T0_DQS_13pin AA13 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L5N_T0_13pin AA14 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L4P_T0_13pin AA15 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L1N_T0_13pin AA16 | Connected to: Not connected 67% · a signal 33% | — |
| VCCO_13pin AA17, AB14 | Connected to: 3.3V 83% · not connected 17% |
|
| IO_L17P_T2_A14_D30_14pin AA18 | Connected to: Signal 67% · not connected 33% |
|
| IO_L15P_T2_DQS_RDWR_B_14pin AA19 | Connected to: Signal 67% · not connected 33% |
|
| IO_L8P_T1_D11_14pin AA20 | Connected to: Signal 67% · not connected 33% |
|
| IO_L8N_T1_D12_14pin AA21 | Connected to: Signal 67% · not connected 33% |
|
| IO_L8N_T1_13pin AB10 | Connected to: Not connected 83% · a signal 17% | — |
| IO_L3N_T0_DQS_13pin AB13 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L4N_T0_13pin AB15 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L2P_T0_13pin AB16 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L17N_T2_A13_D29_14pin AB18 | Connected to: Signal 67% · not connected 33% |
|
| IO_L15N_T2_DQS_DOUT_CSO_pin AB20 | Connected to: Signal 67% · not connected 33% |
|
| IO_L10P_T1_D14_14pin AB21 | Connected to: Signal 67% · not connected 33% |
|
| IO_L10N_T1_D15_14pin AB22 | Connected to: Signal 67% · not connected 33% |
|
| MGTPTXP0_216pin B4 | Connected to: Signal 67% · not connected 33% |
|
| MGTAVTTpin B5, B7, B9, B11, C4, C8 | Connected to: 1.2V 67% · not connected 17% · GND 17% | — |
| MGTPTXP2_216pin B6 | Connected to: Not connected 67% · a signal 33% |
|
| IO_L7N_T1_16pin B16 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L11N_T1_SRCC_16pin B18 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L21P_T3_DQS_16pin B21 | Connected to: TPD12S520DBT 33% · not connected 33% |
|
| VCCO_35pin C1, F2 | Connected to: 3.3V 83% · not connected 17% |
|
| MGTPTXN1_216pin C5 | Connected to: Not connected 67% · a signal 33% |
|
| MGTPTXN3_216pin C7 | Connected to: Not connected 67% · a signal 33% |
|
| IO_L3P_T0_DQS_16pin C14 | Connected to: Not connected 67% · a signal 33% | — |
| IO_L3N_T0_DQS_16pin C15 | Connected to: Not connected 67% · a signal 33% | — |
| MGTPTXP1_216pin D5 | Connected to: Not connected 67% · a signal 33% |
|
| MGTAVCCpin D6, D10, E8 | Connected to: 1V 67% · not connected 17% · GND 17% |
|
| MGTPTXP3_216pin D7 | Connected to: Not connected 67% · a signal 33% |
|
| IO_L5N_T0_16pin D16 | Connected to: Not connected 67% · a signal 33% | — |
74 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lesonar2 beamforming rx hardware by tornyol, ArtixDevBoard by RasmusStagsted, Artix-7-FPGA-Dev-Board by LZajmi and RPi-HwAB by prestofuoco.
The XC7A100T-FGG484 in open source designs
The gallery holds 13 open source boards using the XC7A100T-FGG484 from 7 GitHub repositories; a typical one measures about 106 × 139 mm and carries around 270 components.
67% use four copper layers or more, and 23% carry an open source license.
The most starred is Lesonar2 beamforming rx hardware by tornyol.
Parts used alongside the XC7A100T-FGG484
Microcontrollers on boards using the XC7A100T-FGG484
What boards using the XC7A100T-FGG484 are built for
XC7A100T-FGG484: common questions
Where can I find a XC7A100T-FGG484 reference design?
Each of the 13 boards on this page is a real design using the XC7A100T-FGG484. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XC7A100T-FGG484 VCCO_16 pin?
The VCCO_16 pins have a decoupling capacitor on 6 of 6 designs, most often 470 nF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the XC7A100T-FGG484.
What decoupling capacitors do designs use on the XC7A100T-FGG484 VCCO_34 pin?
The VCCO_34 pins have a decoupling capacitor on 5 of 6 designs, most often 470 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the XC7A100T-FGG484.
What decoupling capacitors do designs use on the XC7A100T-FGG484 VCCO_35 pin?
The VCCO_35 pins have a decoupling capacitor on 5 of 6 designs, most often 470 nF (then 220 nF). Counted from the KiCad layouts of 6 open source designs using the XC7A100T-FGG484.
Which microcontrollers do boards using the XC7A100T-FGG484 use?
Most are built on FPGA (13).
How big is a typical board using the XC7A100T-FGG484?
The median is 106 × 139 mm, and 33% are two-layer designs.
What is the most popular open source board using the XC7A100T-FGG484?
By GitHub stars, Lesonar2 beamforming rx hardware by tornyol, with 112 stars.
Can I simulate one of these boards using the XC7A100T-FGG484 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.