21 open source boards using the IP4220CZ6

Real designs built with the IP4220CZ6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the IP4220CZ6

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the IP4220CZ6 connects to, and the resistors, capacitors and other passives placed on it.

  • The D pins have a series resistor on 10 of 17 designs, most often 22 Ω (then 33 Ω).
Dpin 1, 3, 6Connected to: A connector 53%, the microcontroller 25% · not connected 27%
  • Series resistor on 59% · 22 Ω (6), 33 Ω (5), 27 Ω (4)
GNDpin 2Connected to: GND 100%
I/O_3pin 4Connected to: A connector 53%, the microcontroller 29% · not connected 24%
  • Series resistor on 35% · 22 Ω (2), 1.5 kΩ (2), 15 Ω (2)
VPpin 5Connected to: 5V 71% · a signal 29%
  • Decoupling capacitor on 35% · 100 nF (3), 10 µF (3), 10 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hydrabus by hydrabus, PocketAdmin by krakrukra, Helios dac by Grix and PC-KHARON-386-MAIN by UzixLS.

The IP4220CZ6 in open source designs

The gallery holds 21 open source boards using the IP4220CZ6 from 18 GitHub repositories; a typical one measures about 75.2 × 58.5 mm and carries around 97 components.

70% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Hydrabus by hydrabus.

Microcontrollers on boards using the IP4220CZ6

IP4220CZ6: common questions

Where can I find a IP4220CZ6 reference design?

Each of the 21 boards on this page is a real design using the IP4220CZ6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the IP4220CZ6 D pin?

The D pins have a series resistor on 10 of 17 designs, most often 22 Ω (then 33 Ω). Counted from the KiCad layouts of 17 open source designs using the IP4220CZ6.

What parts are used alongside the IP4220CZ6?

The LM358, MCP1700-3302E/TT, STM32F103CB and W25N01GVZEIG appear in the most repositories here.

Which microcontrollers do boards using the IP4220CZ6 use?

Most are built on STM32 (8), FPGA (3), Microchip SAM (2) and Silicon Labs (2).

How big is a typical board using the IP4220CZ6?

The median is 75.2 × 58.5 mm, and 70% are two-layer designs.

What is the most popular open source board using the IP4220CZ6?

By GitHub stars, Hydrabus by hydrabus, with 356 stars.

Can I simulate one of these boards using the IP4220CZ6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part