Front

hexan86·2026-Communicator_Badge-Lecco_IT·hardware/communicator_front/front_pcb.kicad_pcb

Front PCB layout, top view — open source ESP32 board by hexan86

About the Front PCB

Front is an open source ESP32 PCB design by hexan86, published on GitHub under the MIT license. It is a 2-layer board measuring 148 × 81 mm, with 7 components from 6 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. By type, the board carries 3 resistors, 2 capacitors, 1 IC and 1 diode.

It belongs with the wearables designs in this gallery.

From the project

Based on 2025 Hackaday Communicator Badge original Repo - Adding here my own Apps

Front, from the project README
From the project README

Main components on the Front

Front bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
ICM7555xB
U1
1
LED
D1
1
10UF
100 nF
C1
1
1 uF
C2
1
1k
R1
2
5.1K
1 M
R2, R3

Front design files

The KiCad project lives in the hexan86/2026-Communicator_Badge-Lecco_IT repository on GitHub; these links point at the commit this page was built from.

Front: common questions

What microcontroller does the Front use?

The Front is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Front PCB?

The Front measures 148 × 81 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Front?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Front design files?

From the hexan86/2026-Communicator_Badge-Lecco_IT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Front design in my own project?

Yes, under the terms of its MIT license, which hexan86 chose for the repository.

Can I test firmware for the Front without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in 2026-Communicator_Badge-Lecco_IT

Similar boards