HexArm

HexFud·HexArm·PCB/6axis_robot.kicad_pcb

HexArm PCB layout, top view — open source STM32 board by HexFud

About the HexArm PCB

HexArm is an open source STM32 PCB design by HexFud, published on GitHub. It is a 4-layer board measuring 124.4 × 115.3 mm, with 91 components from 37 distinct parts.

Its main chip is the STM32F446RETx, from the STM32 family. Other key parts include the TPS54331D, AMS1117-3.3, SN65HVD230 and PC817. By type, the board carries 32 capacitors, 24 connectors, 21 resistors, 5 ICs, 4 diodes and 1 transistor.

It belongs with the robotics & motion designs in this gallery.

From the project

I created this 6 axis robotic arm entirely from scratch starting from the PCB to the 3D modelling and designing.

I created this 6 axis robotic arm entirely from scratch starting from the PCB to the 3D modelling and designing.

I designed the PCB that can take up to 6 motors (I used 6 NEMA 17) with 6 driver boards that you can directly plug into the PCB. In the PCB case there is a cutout for a 40mm fan directly pluggable into the dedicated +5V socket (identified by FAN or J8 connector), this is foundamental to keep the motor drivers cool and keep things as safe as possible. The board runs on 24V connection and includes connections for:

HexArm, from the project README
From the project README

Main components on the HexArm

HexArm bill of materials (BOM)

91 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS54331D
U1
1
AMS1117-3.3
U8
1
STM32F446RETx
U9
1
SN65HVD230
U10
1
PC817
U11
1
AO4407A
Q1
1
8MHz
Y3
7
Conn_01x03_Socket
J2, J8, J9, J10, J11, J12, J20
1
1729128
J17
1
Conn_01x04_Socket
J18
1
Conn_01x04_Socket
J19
2
Conn_01x02_Socket
J21, J22
6
Conn_02x08_Counter_Clockwise
J24, J26, J28, J30, J32, J34
6
Conn_01x04_Socket
J25, J27, J29, J31, J33, J35
1
3A
F3
1
SW_Push
SW2
1
B340
D1
1
SMBJ36A
D2
2
LED
D4, D5
1
8.2uH
L1
Show 17 more
QtyPartRefs
2
18pF
C1, C2
15
100nF
C6, C7, C8, C9, C10, C11, C13, C14 +7
1
4.7uF
C12
4
10uF
C15, C16, C29, C32
6
100uF
C18, C20, C22, C24, C26, C28
1
6.8pF
C33
1
1nF
C36
1
8.2nF
C37
1
47uF
C39
12
10k
R4, R8, R9, R11, R12, R13, R14, R15 +4
2
1k
R5, R6
2
100k
R7, R10
1
2.2k
R18
1
120
R20
1
10.2k
R25
1
1.96k
R26
1
64.9k
R27

HexArm design files

The KiCad project lives in the HexFud/HexArm repository on GitHub; these links point at the commit this page was built from.

HexArm: common questions

What microcontroller does the HexArm use?

The HexArm is built around the STM32F446RETx, from the STM32 family.

How big is the HexArm PCB?

The HexArm measures 124.4 × 115.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the HexArm?

91 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HexArm design files?

From the HexFud/HexArm repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HexArm design in my own project?

The repository has no license, so all rights stay with HexFud. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HexArm without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards