HardLabs

AgroNeck

heyboiiiii·AgroNeck

AgroNeck PCB layout, top view — open source ESP32 board by heyboiiiii

About the AgroNeck PCB

AgroNeck is an open source ESP32 PCB design by heyboiiiii, published on GitHub. It is a 2-layer board measuring 120 × 120 mm, with 13 components from 12 distinct parts.

Its main chip is the ESP32_devkit1, from the ESP32 family. Other key parts include the LM35-LP. By type, the board carries 5 ICs, 5 capacitors and 3 connectors.

From the project

Schematic and circuit designs for AgroNeck device. Project: Agronomad.

Main components on the AgroNeck

LM35-LP

AgroNeck bill of materials (BOM)

13 components, 12 distinct parts.

QtyPartRefs
1
~
U2
1
~
U3
1
~
U5
1
LM35-LP
U6
1
~
U8
1
Screw_Terminal_01x08
J1
1
CONTROLVCC
J2
1
Screw_Terminal_01x04
J3
2
100uF
C4, C6
1
1uF
C5
1
0.1uF
C7
1
470uF
C8

AgroNeck design files

The KiCad project lives in the heyboiiiii/AgroNeck repository on GitHub; these links point at the commit this page was built from.

AgroNeck: common questions

What microcontroller does the AgroNeck use?

The AgroNeck is built around the ESP32_devkit1, from the ESP32 family.

How big is the AgroNeck PCB?

The AgroNeck measures 120 × 120 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AgroNeck?

13 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the AgroNeck design files?

From the heyboiiiii/AgroNeck repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AgroNeck design in my own project?

The repository has no license, so all rights stay with heyboiiiii. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AgroNeck without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards