LVDS
About the LVDS PCB
LVDS is an open source PCB design by himanshu40304, published on GitHub. It is a 4-layer board measuring 70 × 50 mm, with 10 components from 8 distinct parts.
Other key parts include the SN65LVDS1D and SN65LVDT2D. By type, the board carries 5 capacitors, 3 connectors and 2 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This repository contains the automation workflow and some projects made by using this workflow which makes pcb designs using ai assistance faster than making pcb designs manually.
A high-speed 4-layer Low-Voltage Differential Signaling (LVDS) evaluation board featuring the Texas Instruments SN65LVDS1D (Driver) and SN65LVDT2D (Receiver with integrated 110 Ω termination) capable of $\ge 400\text{ Mbps}$ data transmission with co-planar controlled-impedance interconnects, full-coverage ground stitching, and 3D full-wave OpenEMS/ParaView simulation.
Main components on the LVDS
LVDS bill of materials (BOM)
10 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN65LVDS1D | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SN65LVDT2D | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | INPUT signal | SMA_Amphenol_132134-10_Vertical | J1 |
| 1 | OUTPUT signal | SMA_Amphenol_132134-10_Vertical | J2 |
| 1 | 3V3 | PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 2 | 100nF | C_0805_2012Metric | C1, C3 |
| 2 | 1nF | C_0805_2012Metric | C2, C4 |
| 1 | 10uF | C_0805_2012Metric | C5 |
LVDS design files
The KiCad project lives in the himanshu40304/PCB_automation repository on GitHub; these links point at the commit this page was built from.
LVDS: common questions
How big is the LVDS PCB?
The LVDS measures 70 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LVDS?
10 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LVDS design files?
From the himanshu40304/PCB_automation repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LVDS design in my own project?
The repository has no license, so all rights stay with himanshu40304. Use it as a reference, and ask the author before reusing the design.
More boards in PCB_automation
Binary Counter 8Bit
70 × 45 mm31 parts2LNo license1
ESP32Test backup
100 × 30 mm30 parts2LNo license1
ESP32Converter v9 plot temp
100 × 30 mm28 parts2LNo license1
ESP32Converter
100 × 30 mm28 parts2LNo license1
AVR/ArduinoRF Detector
68 × 53 mm21 parts4LNo license1
AC DC trial
60 × 50 mm20 parts4LNo license1
LVDS.recovered.2026-09-26 152659
85 × 37.5 mm9 parts2LNo license1
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979