HardLabs

Converter v9 plot temp

himanshu40304·PCB_automation·projects/ACtoDCtoMicrocontroller/Converter/Converter_v9_plot_temp.kicad_pcb

Converter v9 plot temp PCB layout, top view — open source ESP32 board by himanshu40304
Simulate this board

About the Converter v9 plot temp PCB

Converter v9 plot temp is an open source ESP32 PCB design by himanshu40304, published on GitHub. It is a 2-layer board measuring 100 × 30 mm, with 28 components from 21 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the HLK-5M05 and AMS1117-3.3. By type, the board carries 9 capacitors, 4 resistors, 3 ICs, 2 connectors, 2 switches and 2 LEDs.

It belongs with the iot & wireless designs in this gallery.

From the project

This repository contains the automation workflow and some projects made by using this workflow which makes pcb designs using ai assistance faster than making pcb designs manually.

An autonomous, end-to-end PCB design, verification, and manufacturing pipeline powered by KiCad 10, SPICE, OpenEMS 3D FDTD, ParaView, and AI-driven Automation Agents.

⭐ If you find this repository useful for your PCB workflows or research, please consider giving it a star!

This repository contains automated workflows, design tools, and complete hardware projects demonstrating AI-assisted schematic creation, SPICE verification, electrical rules check (ERC), automated component placement, routing, clearance isolation, and design rules check (DRC).

Converter v9 plot temp, from the project README
From the project README

Main components on the Converter v9 plot temp

HLK-5M05AMS1117-3.3ESP32-C3-WROOM-02

Converter v9 plot temp bill of materials (BOM)

28 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
HLK-5M05
U1
1
AMS1117-3.3
U2
1
ESP32-C3-WROOM-02
U3
1
AC_IN (220V)
J1
1
SERVO_5V (PWM)
J2
1
1A 250V
F1
1
USB_B_Micro
J_USB1
1
5D-9
RT1
1
07D471K
RV1
1
RESET
SW1
1
BOOT
SW2
1
GREEN (5V)
LED1
1
BLUE (3.3V)
LED2
2
SS34
D1, D2
1
100nF 275VAC
C1
1
470uF 16V
C2
4
100nF
C3, C6, C7, C9
2
10uF
C4, C8
1
22uF
C5
2
1k
R1, R2
Show 1 more
QtyPartRefs
2
10k
R3, R4

Converter v9 plot temp design files

The KiCad project lives in the himanshu40304/PCB_automation repository on GitHub; these links point at the commit this page was built from.

Converter v9 plot temp: common questions

What microcontroller does the Converter v9 plot temp use?

The Converter v9 plot temp is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Converter v9 plot temp PCB?

The Converter v9 plot temp measures 100 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Converter v9 plot temp?

28 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Converter v9 plot temp design files?

From the himanshu40304/PCB_automation repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Converter v9 plot temp design in my own project?

The repository has no license, so all rights stay with himanshu40304. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Converter v9 plot temp without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PCB_automation

Similar boards