HardLabs

Flight computer rocketry

Himanshukohale22·TVC_FlightController·Hardware/FlightControllerV0.2/flight_computer_rocketry.kicad_pcb

Flight computer rocketry PCB layout, top view — open source STM32 board by Himanshukohale22

About the Flight computer rocketry PCB

Flight computer rocketry is an open source STM32 PCB design by Himanshukohale22, published on GitHub. It is a 2-layer board measuring 59.8 × 39.6 mm, with 43 components from 25 distinct parts.

Its main chip is the STM32F401CBUx, from the STM32 family. Other key parts include the AMS1117-3.3, MPU-6050, BMP280 and L7805. By type, the board carries 18 capacitors, 10 connectors, 5 ICs, 4 resistors, 3 diodes and 2 switches.

It belongs with the sensors and robotics & motion designs in this gallery.

From the project

This repo contains the Hardware desing for electronics and Firmware for Flight controller

This repository contains hardware files and gerber files of board . this is open source project board can be used aacording to features mentioned below.

STM32f4 cortex M4 based on board microcontroller for precision and fligt data simulation. core - Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator . 1 Mbyte of Flash memory 192+4 Kbytes of SRAM Serial wire debug sensors MPU9250.(IMU) 9-axis of freedom. (6 are used). accerelometer an gyroscopic values Higher calibration precision. for statbility and orientation of board/vehicle. configured with SPI1. BMP280 .(Barometer)…

Main components on the Flight computer rocketry

AMS1117-3.3MPU-6050BMP280STM32F401CBUxL7805

Flight computer rocketry bill of materials (BOM)

43 components, 25 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
MPU-6050
U2
1
BMP280
U3
1
STM32F401CBUx
U4
1
L7805
U5
1
Crystal_GND23_Small
Y1
1
USB_B_Mini
J1
5
Conn_01x03_Male
J2, J3, J4, J5, J8
1
Conn_01x04_Pin
J6
1
Conn_01x02_Male
J7
1
Conn_01x03_Male
J9
1
Conn_01x04_Pin
J10
1
SW_Push
SW1
1
SW_SPDT
SW3
1
GREEN
D1
1
blue
D2
1
RED
D3
2
10uf
C1, C15
4
0.1uf
C2, C4, C5, C16
1
10nf
C3
Show 5 more
QtyPartRefs
2
100nf
C6, C8
1
2.2nf
C7
2
12pf
C9, C10
6
100pf
C11, C12, C13, C14, C17, C18
4
1k
R1, R2, R3, R5

Flight computer rocketry design files

The KiCad project lives in the Himanshukohale22/TVC_FlightController repository on GitHub; these links point at the commit this page was built from.

Flight computer rocketry: common questions

What microcontroller does the Flight computer rocketry use?

The Flight computer rocketry is built around the STM32F401CBUx, from the STM32 family.

How big is the Flight computer rocketry PCB?

The Flight computer rocketry measures 59.8 × 39.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Flight computer rocketry?

43 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Flight computer rocketry design files?

From the Himanshukohale22/TVC_FlightController repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Flight computer rocketry design in my own project?

The repository has no license, so all rights stay with Himanshukohale22. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Flight computer rocketry without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in TVC_FlightController

Similar boards