16 open source boards using the STM32F401CBUx
Real designs built with the STM32F401CBUx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Tako
ssbb
230.7 × 97.8 mm76 parts4LMIT197RP2040/RP2350
Fc980c controller
wlhlm
82.3 × 35.5 mm36 parts2LNo license20STM32
Travaulta WKL
calvin-mcd
208.3 × 75.8 mm46 parts4LCC-BY-NC-4.016STM32
Plate EC
calvin-mcd
245.7 × 83.6 mm147 parts4LCC-BY-NC-4.07STM32
Motorcontroller hw
nerdmaennchen
50 × 40 mm67 parts2LMIT6STM32
Controller-Drone
Himanshukohale22
59.8 × 39.6 mm43 parts2LNo license4STM32
The nicholas van prototype
calvin-mcd
242.9 × 95.3 mm58 parts4LCC-BY-NC-4.02STM32
EC60 origin
vadikgo
285 × 94.6 mm51 parts4LMIT0STM32
Controller-Drone-
adirock09
59.8 × 39.6 mm43 parts2LNo license0STM32
Flight computer rocketry
Himanshukohale22
59.8 × 39.6 mm43 parts2LNo license0STM32
DroneController
adirock09
59.8 × 39.6 mm43 parts2LNo license0STM32
DroneController
Shubhkr08
59.8 × 39.6 mm43 parts2LNo license0STM32
Travaulta HHKB
calvin-mcd
209.7 × 76.4 mm45 parts4LCC-BY-NC-4.016STM32
Forti EC
calvin-mcd
245.7 × 82.9 mm123 parts4LCC-BY-NC-4.07STM32
The nicholas van revision
calvin-mcd
242.9 × 95.3 mm54 parts4LCC-BY-NC-4.02STM32
AURA
shourya2007mittal-hub
69 × 43.3 mm59 parts2LNo license0
How designs wire the STM32F401CBUx
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the STM32F401CBUx connects to, and the resistors, capacitors and other passives placed on it.
- The PH0 pin has a crystal on 12 of 13 designs, most often 8 MHz.
- The PH1 pin has a crystal on 12 of 13 designs, most often 8 MHz.
- The PC15 pin is left unconnected on 11 of 13 designs (a signal on 2).
- The PC13 pin is left unconnected on 10 of 13 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 100% |
|
| PC13pin 2 | Connected to: Not connected 77% · a signal 23% | — |
| PC14pin 3 | Connected to: Not connected 77% · a signal 23% | — |
| PC15pin 4 | Connected to: Not connected 85% · a signal 15% | — |
| PH0pin 5 | Connected to: Signal 100% |
|
| PH1pin 6 | Connected to: Signal 100% |
|
| NRSTpin 7 | Connected to: Signal 54% · not connected 46% |
|
| VSSApin 8 | Connected to: GND 92% | — |
| VREF+pin 9 | Connected to: Not connected 54% · VBAT 46% |
|
| PA0pin 10 | Connected to: Not connected 46% · a signal 46% |
|
| PA3pin 13 | Connected to: A connector 46%, OPA350 31% · not connected 15% |
|
| PA5pin 15 | Connected to: Not connected 62% · a signal 38% | — |
| PA6pin 16 | Connected to: Not connected 62% · a signal 38% | — |
| PA7pin 17 | Connected to: Not connected 62% · a signal 38% | — |
| PB0pin 18 | Connected to: Not connected 62% · a signal 38% | — |
| PB2pin 20 | Connected to: BMP280 38% |
|
| VCAP1pin 22 | Connected to: Not connected 46% · a signal 46% |
|
| VSSpin 23, 35, 47, 49 | Connected to: GND 92% | — |
| VDDpin 24, 36, 48 | Connected to: 3.3V 95% |
|
| PB12pin 25 | Connected to: Not connected 62% · a signal 38% | — |
| PB13pin 26 | Connected to: Not connected 62% · a signal 38% | — |
| PB14pin 27 | Connected to: Not connected 77% · a signal 23% | — |
| PB15pin 28 | Connected to: Not connected 69% · a signal 31% | — |
| PA10pin 31 | Connected to: A connector 38% · not connected 15% |
|
| PA15pin 38 | Connected to: Not connected 77% · a signal 23% | — |
| BOOT0pin 44 | Connected to: Signal 92% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tako by ssbb, Fc980c controller by wlhlm, Travaulta HHKB by calvin-mcd and Forti EC by calvin-mcd.
The STM32F401CBUx in open source designs
The gallery holds 16 open source boards using the STM32F401CBUx from 13 GitHub repositories; a typical one measures about 145.3 × 59.6 mm and carries around 49 components.
50% are two-layer designs, the rest use four layers or more, and 19% carry an open source license.
The most starred is Tako by ssbb.
Parts used alongside the STM32F401CBUx
Microcontrollers on boards using the STM32F401CBUx
What boards using the STM32F401CBUx are built for
STM32F401CBUx: common questions
Where can I find a STM32F401CBUx reference design?
Each of the 16 boards on this page is a real design using the STM32F401CBUx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F401CBUx PH0 pin connected?
The PH0 pin has a crystal on 12 of 13 designs, most often 8 MHz. Counted from the KiCad layouts of 13 open source designs using the STM32F401CBUx.
How is the STM32F401CBUx PH1 pin connected?
The PH1 pin has a crystal on 12 of 13 designs, most often 8 MHz. Counted from the KiCad layouts of 13 open source designs using the STM32F401CBUx.
How is the STM32F401CBUx PC15 pin connected?
The PC15 pin is left unconnected on 11 of 13 designs (a signal on 2). Counted from the KiCad layouts of 13 open source designs using the STM32F401CBUx.
What parts are used alongside the STM32F401CBUx?
The BMP280, L7805, MPU-6050, 74HC4051 and AMS1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the STM32F401CBUx use?
Most are built on STM32 (15) and RP2040/RP2350 (1).
How big is a typical board using the STM32F401CBUx?
The median is 145.3 × 59.6 mm, and 50% are two-layer designs.
What is the most popular open source board using the STM32F401CBUx?
By GitHub stars, Tako by ssbb, with 197 stars.
Can I simulate one of these boards using the STM32F401CBUx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.