HardLabs

600 to 12V dc

HKUST-Red-Bird-Racing-EVRT·GEN6_ELEC·600 to 12V dc/600 to 12V dc.kicad_pcb

600 to 12V dc PCB layout, top view — open source AVR/Arduino board by HKUST-Red-Bird-Racing-EVRT

About the 600 to 12V dc PCB

600 to 12V dc is an open source AVR/Arduino PCB design by HKUST-Red-Bird-Racing-EVRT, published on GitHub. It is a 2-layer board measuring 66.8 × 60 mm, with 26 components from 22 distinct parts.

Its main chip is the ATMEGA328P-A, from the AVR/Arduino family. By type, the board carries 10 capacitors, 5 resistors, 3 connectors, 3 diodes, 1 IC and 1 transistor.

From the project

ELEC Github Repo for Gen 6

Main components on the 600 to 12V dc

ATMEGA328P-A

600 to 12V dc bill of materials (BOM)

26 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328P-A
LT8316EFE-PBF
U2
1
KY2N7002
TK3P80E
Q1
1
559010274
Conn_01x02_Pin
J1
1
CONN_02X03_ODD_EVEN
Conn_01x02_Pin
J2
1
CONN_01X05
Conn_01x02_Pin
J3
1
Fuse
F1
1
1mH
RPT129-1
1
CMHZ4107 TR PBFREE
CMHZ4107_TR_PBFREE
Z1
2
1N4148W
US1KFA
D1, D4
1
1N4148W
CMDSH2-3 TR PBFREE
D2
1
1UF
10u
C2
3
1UF
50u
C3, C4, C6
1
1UF
10p
C5
2
1UF
100n
C7, C8
1
1UF
0.1u
C9
1
1UF
100n
C11
1
1UF
10u
C12
1
20k
R4
1
2.5k
R5
1
10k
R7
Show 2 more
QtyPartRefs
1
500K
22k
R15
1
4.7K
200mR
R18

600 to 12V dc design files

The KiCad project lives in the HKUST-Red-Bird-Racing-EVRT/GEN6_ELEC repository on GitHub; these links point at the commit this page was built from.

600 to 12V dc: common questions

What microcontroller does the 600 to 12V dc use?

The 600 to 12V dc is built around the ATMEGA328P-A, from the AVR/Arduino family.

How big is the 600 to 12V dc PCB?

The 600 to 12V dc measures 66.8 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 600 to 12V dc?

26 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 600 to 12V dc design files?

From the HKUST-Red-Bird-Racing-EVRT/GEN6_ELEC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 600 to 12V dc design in my own project?

The repository has no license, so all rights stay with HKUST-Red-Bird-Racing-EVRT. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 600 to 12V dc without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in GEN6_ELEC

Similar boards