Gen 6 ts indicator v1.0
About the Gen 6 ts indicator v1.0 PCB
Gen 6 ts indicator v1.0 is an open source AVR/Arduino PCB design by HKUST-Red-Bird-Racing-EVRT, published on GitHub. It is a 2-layer board measuring 66.8 × 60 mm, with 46 components from 36 distinct parts.
Its main chip is the ATMEGA328P-A, from the AVR/Arduino family. Other key parts include the BQ76940DBT. By type, the board carries 19 resistors, 12 capacitors, 4 diodes, 3 connectors, 2 ICs and 2 transistors.
From the project
ELEC Github Repo for Gen 6
Main components on the Gen 6 ts indicator v1.0
Gen 6 ts indicator v1.0 bill of materials (BOM)
46 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ76940DBT TL431DBZ | SOT-23 | U1 |
| 1 | ATMEGA328P-A LT8316EFE-PBF | 05-08-1990_ADI | U2 |
| 1 | KY2N7002 TK3P80E | DPAK_TOS | Q1 |
| 1 | AO3402 AO3401A | SOT-23 | Q2 |
| 1 | 559010274 Conn_01x02_Pin | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J1 |
| 1 | CONN_02X03_ODD_EVEN Conn_01x02_Pin | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J2 |
| 1 | CONN_01X05 Conn_01x02_Pin | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J3 |
| 1 | Fuse | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | LM311 | SOIC-8_3.9x4.9mm_P1.27mm | LM1 |
| 1 | 1mH | rpt129 | RPT129-1 |
| 1 | CMHZ4107 TR PBFREE CMHZ4107_TR_PBFREE | SOD3816X135N | Z1 |
| 2 | 1N4148W US1KFA | SOD-123FA_ONS | D1, D4 |
| 1 | 1N4148W CMDSH2-3 TR PBFREE | SDO_CMDSH2-3 TR PBFREE_CNS | D2 |
| 1 | 1N4148W 12V | D_DO-35_SOD27_P7.62mm_Horizontal | D3 |
| 1 | 1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1UF 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 3 | 1UF 47u | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | C3, C4, C6 |
| 1 | 1UF 10p | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 3 | 1UF 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C11 |
| 1 | 1UF 0.1u | C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C9 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1UF 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 1UF 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 1 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 2k2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 21.5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 2.49k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 3 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R13, R14 |
| 1 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 4 | 249k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10, R11 |
| 1 | 25k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 500K 22.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 10M 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 10K 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 4.7K 200mR | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 10K 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
Gen 6 ts indicator v1.0 design files
The KiCad project lives in the HKUST-Red-Bird-Racing-EVRT/GEN6_ELEC repository on GitHub; these links point at the commit this page was built from.
Gen 6 ts indicator v1.0: common questions
What microcontroller does the Gen 6 ts indicator v1.0 use?
The Gen 6 ts indicator v1.0 is built around the ATMEGA328P-A, from the AVR/Arduino family.
How big is the Gen 6 ts indicator v1.0 PCB?
The Gen 6 ts indicator v1.0 measures 66.8 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gen 6 ts indicator v1.0?
46 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Gen 6 ts indicator v1.0 design files?
From the HKUST-Red-Bird-Racing-EVRT/GEN6_ELEC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Gen 6 ts indicator v1.0 design in my own project?
The repository has no license, so all rights stay with HKUST-Red-Bird-Racing-EVRT. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Gen 6 ts indicator v1.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in GEN6_ELEC
AVR/ArduinoAMS SLAVE TEST
68 × 110 mm191 parts2LNo license0
AVR/ArduinoAMS slave
68 × 110 mm189 parts2LNo license0
AVR/ArduinoBDUCU
140 × 60 mm169 parts2LNo license0
AVR/ArduinoVCU V3.3
114 × 95 mm145 parts2LNo license0
AVR/ArduinoCharger
100 × 100 mm126 parts2LNo license0
AVR/ArduinoFront dash unit
101 × 63.3 mm90 parts2LNo license0
AVR/ArduinoTSALG ACCUM V2
140 × 60 mm88 parts2LNo license0
AVR/ArduinoSSRU v4.0
95 × 78 mm68 parts2LNo license0
VTAP
68 × 171.5 mm36 parts2LNo license0
AVR/Arduino600 to 12V dc
66.8 × 60 mm26 parts2LNo license0
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746