SAQ
hmatuschek·bat-n-saq·hardware/SAQ.kicad_pcb
About the SAQ PCB
SAQ is an open source PCB design by hmatuschek, published on GitHub. It is a 2-layer board measuring 61 × 43.2 mm, with 36 components from 27 distinct parts.
Other key parts include the LM555 and LM386. By type, the board carries 14 capacitors, 10 resistors, 4 connectors, 2 ICs, 2 diodes and 1 transistor.
It belongs with the rf & radio designs in this gallery.
From the project
Fledermausdetektor und SAQ Empfänger Bastelprojekt
Versuch eines Bausatzes für Schüler und Studentengruppen von Y09 und Y07.
Der Fledermausdetektorbausatz von Franzis eignet sich auch hervorragend als Empfänger für den VLF Sender SAQ. Leider ist der darin enthaltene AM/FM Empfängerbaustein CD2003 wenn überhaupt, nur noch als SMD Bauelement zu bekommen. Dies macht den Aufbau für Schüler und Studenen schwierig.
Main components on the SAQ
SAQ bill of materials (BOM)
36 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM555 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | LM386 | DIP-8_W7.62mm_LongPads | U2 |
| 1 | 2N3904 | TO-92_Inline_Wide | Q1 |
| 1 | Sense | TerminalBlock_RND_205-00013_1x03_P5.00mm_Horizontal | J1 |
| 1 | 9V | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2 |
| 1 | out | Jack_3.5mm_Ledino_KB3SPRS_Horizontal | J3 |
| 1 | SP | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J4 |
| 1 | 100k | Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 1 | 47k | Potentiometer_Alps_RK09K_Single_Vertical | RV2 |
| 1 | SW_SPDT | SW_Slide_1P2T_CK_OS102011MS2Q | SW1 |
| 2 | BAT85 | D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D1, D2 |
| 1 | 680p* | C_Disc_D3.0mm_W2.0mm_P2.50mm | C1 |
| 5 | 10n | C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C4, C5, C8, C10 |
| 3 | 220u | CP_Radial_D6.3mm_P2.50mm | C3, C6, C13 |
| 1 | 47n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C7 |
| 1 | 10n | C_Disc_D4.3mm_W1.9mm_P5.00mm | C9 |
| 2 | 10u | CP_Radial_D6.3mm_P2.50mm | C11, C14 |
| 1 | 47n | C_Disc_D3.0mm_W2.0mm_P2.50mm | C12 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1 |
| 1 | 6.8k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 560k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 1 | 12k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 1 | 39k | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R5 |
| 1 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 12 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R8 |
| 2 | 22 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R9, R10 |
SAQ design files
The KiCad project lives in the hmatuschek/bat-n-saq repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/SAQ.kicad_pcb
SAQ: common questions
How big is the SAQ PCB?
The SAQ measures 61 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SAQ?
36 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the SAQ design files?
From the hmatuschek/bat-n-saq repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SAQ design in my own project?
The repository has no license, so all rights stay with hmatuschek. Use it as a reference, and ask the author before reusing the design.
More boards in bat-n-saq
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568