41 open source boards using the LM555
Real designs built with the LM555, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
BE6502 SBC
tebl
99.1 × 99.1 mm61 parts2LCERN-OHL-1.2128Vic2020mainboard
danwerner21
357.8 × 124.5 mm127 parts2LNo license78BSPD
SDU-Vikings
100 × 50 mm84 parts2LCC0-1.030Commodore-Plus4
StormTrooper
284.7 × 158.9 mm212 parts2LNo license2010band nixie
davemuscle
274.1 × 114.7 mm312 parts2LNo license7DC404TrainingBadge
seeigecannon
94 × 72.9 mm88 parts2LUnlicense5Kicad LFO 1 2
promesoft
100 × 100 mm147 parts2LMIT2TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license18bitCPU
BrainwashAlpha
246.4 × 185.4 mm277 parts4LNo license1BE6502 computer
FilipCichowski
99.1 × 99.1 mm61 parts2LNo license1SAQ
hmatuschek
61 × 43.2 mm36 parts2LNo license1- schematic only · 112 parts
MSAP-1
mehrantsi
112 partsMIT1 8bit-Sch old-
Arvind595
246.4 × 185.4 mm277 parts4LNo license08bit computer
funkybooboo
246.4 × 185.4 mm277 parts4LNo license0Backtobasic
marcusyoung
246.4 × 185.4 mm277 parts4LNo license08-Bit-Computer
phteven7
246.4 × 185.4 mm277 parts4LNo license08bit computer
tonygilkerson
246.4 × 185.4 mm277 parts4LNo license08bit computer
ChargeInMotion
246.4 × 185.4 mm276 parts4LMIT0Zaza mk1-motor driver
zaza-the-robot
108 × 57.5 mm77 parts2LGPL-3.00Clock circuit
bit4man
145.4 × 95.5 mm63 parts2LNo license0EE-83-PulseGen
eyalo-dev
146.1 × 75.6 mm50 parts2LNo license0Noname
wyolum
104.5 × 25 mm43 parts2LNo license0SEED-Pingpong
p-sampson-II
97.2 × 58.4 mm13 parts2LNo license0LM555
frutgan
26 × 24 mm11 parts2LNo license0Kicad intro project
SDSURocketProject
38.7 × 19.4 mm8 parts2LNo license0Commodore Plus 4
baldengineer
284.7 × 158.9 mm212 parts2LCC-BY-4.0442BE6502 Clock
tebl
45.7 × 99.1 mm29 parts2LCERN-OHL-1.2128Kicad LFO 1 3
promesoft
100 × 100 mm147 parts2LMIT2TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1SAQ proto
hmatuschek
45.7 × 35.6 mm33 parts2LNo license11sqinch555
wyolum
100 × 25 mm42 parts2LNo license0Kicad LFO 1
promesoft
100 × 100 mm137 parts2LMIT2SAQ MC3361
hmatuschek
53.3 × 35.6 mm32 parts2LNo license1AIL TSAL
columbia-fsae
107.6 × 29.5 mm29 parts2LNo license1Pre charge controller
switchcraft
126 × 52.2 mm56 parts2LNo license6HV DCDC
uvmaero
134.6 × 96.5 mm30 parts2LNo license1
How designs wire the LM555
Read from the KiCad layouts of 31 open source designs, one per repository: what each pin of the LM555 connects to, and the resistors, capacitors and other passives placed on it.
- The THR pin has a capacitor to GND on 28 of 31 designs, most often 1 µF (then 10 µF).
- The TR pin has a capacitor to GND on 25 of 31 designs, most often 1 µF (then 10 µF).
- The DIS pin has a pull-up to VCC on 25 of 31 designs, most often 1 kΩ (then 10 kΩ).
- The CV pin has a capacitor to GND on 21 of 31 designs, most often 10 nF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 97% | — |
| TRpin 2 | Connected to: Signal 100% |
|
| Rpin 4 | Connected to: VCC 81% · a signal 16% | — |
| CVpin 5 | Connected to: Signal 71% · not connected 29% |
|
| THRpin 6 | Connected to: Signal 100% |
|
| DISpin 7 | Connected to: Signal 97% |
|
| VCCpin 8 | Connected to: VCC 94% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Commodore Plus 4 by baldengineer, BE6502 Clock by tebl, Vic2020mainboard by danwerner21 and BSPD by SDU-Vikings.
The LM555 in open source designs
The gallery holds 41 open source boards using the LM555 from 32 GitHub repositories; a typical one measures about 102.3 × 96 mm and carries around 63 components.
83% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is Commodore Plus 4 by baldengineer.
Parts used alongside the LM555
What boards using the LM555 are built for
LM555: common questions
Where can I find a LM555 reference design?
Each of the 41 boards on this page is a real design using the LM555. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM555 THR pin connected?
The THR pin has a capacitor to GND on 28 of 31 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 31 open source designs using the LM555.
How is the LM555 TR pin connected?
The TR pin has a capacitor to GND on 25 of 31 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 31 open source designs using the LM555.
What pull-up resistor is used on the LM555 DIS pin?
The DIS pin has a pull-up to VCC on 25 of 31 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 31 open source designs using the LM555.
What parts are used alongside the LM555?
The 74LS00, 74LS04, 74LS08, 74LS139 and 74LS32 appear in the most repositories here.
How big is a typical board using the LM555?
The median is 102.3 × 96 mm, and 83% are two-layer designs.
What is the most popular open source board using the LM555?
By GitHub stars, Commodore Plus 4 by baldengineer, with 442 stars.
Can I simulate one of these boards using the LM555 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.