Breadboard power alligator
hnz1102·breadboard-power-alligator
About the Breadboard power alligator PCB
Breadboard power alligator is an open source PCB design by hnz1102, published on GitHub. It is a 2-layer board measuring 20 × 35 mm, with 19 components from 18 distinct parts.
Other key parts include the CH221K and AZ1117C. By type, the board carries 7 resistors, 3 capacitors, 2 ICs, 2 connectors, 2 jumpers and 2 diodes.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
BREAD BOARD POWER ALLIGATOR : Power Supply for Bread-Board
This is power supplies for bread-board. They are designed to be used with a USB PD power supply. The output voltage is from 3.3V to 20V, and the output current is maximum 1A. The output voltage is fixed each adoptor. I made 6 adapters for bread-board power supply. The adapters are 3.3V, 5V, 9V, 12V, 15V, and 20V. The adapters are connected to the bread-board such an alligator clips. It is easy to set up the power supply for the bread-board. If you use a USB PD power supply, you can use over 9V output. If it is not USB PD, you can use only 3.3V or 5V.

Main components on the Breadboard power alligator
Breadboard power alligator bill of materials (BOM)
19 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH221K | SOT-23-6 | U101 |
| 1 | AZ1117C | SOT-223-3_TabPin2 | U102 |
| 1 | USB_C_RECEPTACLE_POWERONLY_6P USB_C_Receptacle_PowerOnly_6P | CUI_UJC-HP-3-SMT-TR | J101 |
| 1 | 2057-PH2-04-UA PinHeader 02x02 | PinHeader_2x02_P2.54mm_Vertical | J102 |
| 1 | - SHUNT IT IF NO USE AZ117C | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP101 |
| 1 | - SHUNT IT IF NO USE CH221K | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP102 |
| 1 | 3147-B1931URO-20D000114U1930 LED RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D101 |
| 1 | CUS10F30 | D_SOD-323 | D102 |
| 1 | MPZ2012S102ATD25 601-T | R_0805_2012Metric | FB101 |
| 1 | 1UF/50V 1uF/50V | C_0805_2012Metric | C101 |
| 1 | 22UF 22uF | C_0805_2012Metric | C103 |
| 1 | 10UF 10uF | C_0805_2012Metric | C104 |
| 2 | 5K1 | R_0603_1608Metric | R101, R102 |
| 1 | 2K | R_0603_1608Metric | R103 |
| 1 | 1K | R_0603_1608Metric | R104 |
| 1 | 0/ADJ-R2 | R_0603_1608Metric | R105 |
| 1 | 200K | R_0603_1608Metric | R106 |
| 1 | ADJ-R1 | R_0603_1608Metric | R107 |
Breadboard power alligator design files
The KiCad project lives in the hnz1102/breadboard-power-alligator repository on GitHub; these links point at the commit this page was built from.
- Layoutbreadboardpower.kicad_pcb
- Schematicbreadboardpower.kicad_sch
- BOMproduction/bom.csv
Breadboard power alligator: common questions
How big is the Breadboard power alligator PCB?
The Breadboard power alligator measures 20 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breadboard power alligator?
19 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breadboard power alligator design files?
From the hnz1102/breadboard-power-alligator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Breadboard power alligator design in my own project?
The repository has no license, so all rights stay with hnz1102. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k