15 open source boards using the CH221K

Real designs built with the CH221K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the CH221K

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the CH221K connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a series resistor on 10 of 14 designs, most often 200 kΩ (then 47 kΩ).
  • The VDD pin has a pull-up to VBUS on 10 of 14 designs, most often 1 kΩ (then 5.1 kΩ).
  • The CC1 pin has a resistor to GND on 10 of 14 designs, most often 5.1 kΩ.
  • The CC2 pin has a resistor to GND on 10 of 14 designs, most often 5.1 kΩ.
VDDpin 1Connected to: Signal 79% · VBUS 21%
  • Series resistor on 71% · 200 kΩ (4), 47 kΩ (3), 10 kΩ (1)
  • Pull-up to VBUS on 71% · 1 kΩ (8), 5.1 kΩ (1)
  • Capacitor to GND on 64% · 1 µF (8), 100 nF (1)
GNDpin 2Connected to: GND 93%
CC1pin 4Connected to: A connector 79%
  • Resistor to GND on 71% · 5.1 kΩ (9)
CC2pin 5Connected to: A connector 79%
  • Resistor to GND on 71% · 5.1 kΩ (9)
CFGpin 6Connected to: Signal 93%
  • Series resistor on 71% · 200 kΩ (5), 47 kΩ (4), 10 kΩ (2)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Argo v9-stable rev4 by SensorsINI, Pedal snow white autowah single by dvhx, KINK-box by FunDeckHermit and 260321 by McbeEringi.

The CH221K in open source designs

The gallery holds 15 open source boards using the CH221K from 15 GitHub repositories; a typical one measures about 81.3 × 60 mm and carries around 84 components.

87% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Argo v9-stable rev4 by SensorsINI.

Parts used alongside the CH221K

Microcontrollers on boards using the CH221K

CH221K: common questions

Where can I find a CH221K reference design?

Each of the 15 boards on this page is a real design using the CH221K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the CH221K VDD pin?

The VDD pin has a series resistor on 10 of 14 designs, most often 200 kΩ (then 47 kΩ). Counted from the KiCad layouts of 14 open source designs using the CH221K.

What resistor goes on the CH221K CC1 pin?

The CC1 pin has a resistor to GND on 10 of 14 designs, most often 5.1 kΩ. Counted from the KiCad layouts of 14 open source designs using the CH221K.

What resistor goes on the CH221K CC2 pin?

The CC2 pin has a resistor to GND on 10 of 14 designs, most often 5.1 kΩ. Counted from the KiCad layouts of 14 open source designs using the CH221K.

Which microcontrollers do boards using the CH221K use?

Most are built on ESP32 (3), AVR/Arduino (1) and RP2040/RP2350 (1).

How big is a typical board using the CH221K?

The median is 81.3 × 60 mm, and 87% are two-layer designs.

What is the most popular open source board using the CH221K?

By GitHub stars, Argo v9-stable rev4 by SensorsINI, with 14 stars.

Can I simulate one of these boards using the CH221K before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part