HardLabs

Handmade kit

homelith·pico-disp-ident·hw/handmade_kit/handmade_kit.kicad_pcb

Handmade kit PCB layout, top view — open source Raspberry Pi board by homelith

About the Handmade kit PCB

Handmade kit is an open source Raspberry Pi PCB design by homelith, published on GitHub under the MIT license. It is a 2-layer board measuring 69.4 × 54 mm, with 12 components from 4 distinct parts.

Its main chip is the Raspberry_Pi_Pico_with_DVI_sock, from the Raspberry Pi family. Other key parts include the OSL10564-IB. By type, the board carries 8 resistors, 2 ICs and 2 switches.

It belongs with the displays & leds designs in this gallery.

From the project

Custom firmware to make some RP2040 board working as DVI display tester & identifier

- RP2040 搭載ボードと PicoDVI (https://github.com/Wren6991/PicoDVI) を使って、DVI ディスプレイに番号入りのテストパターン表示をさせるツールです。 - PicoDVI の feat/x8scale ブランチ (https://github.com/homelith/PicoDVI/tree/feat/x8scale) 版を用いることで、80x60 画像を VGA 640x480 ディスプレイに引き延ばして表示します。

- 環境準備 + Linux ベースの OS 各種上でコンパイル可能と想定 (x8664 ネイティブの ubuntu 22.04 LTS と WSL2 上の ubuntu 22.04 LTS で試験済) + パッケージインストール : sudo apt install git gcc make cmake gcc-arm-none-eabi libnewlib-arm-none-eabi build-essential golang`

Main components on the Handmade kit

Raspberry_Pi_Pico_with_DVI_sockOSL10564-IB

Handmade kit bill of materials (BOM)

12 components, 4 distinct parts.

QtyPartRefs
1
Raspberry_Pi_Pico_with_DVI_sock
U101
1
OSL10564-IB
U102
2
1825910-7
SW101, SW102
8
R_axial
R101, R102, R103, R104, R105, R106, R107, R108

Handmade kit design files

The KiCad project lives in the homelith/pico-disp-ident repository on GitHub; these links point at the commit this page was built from.

Handmade kit: common questions

What microcontroller does the Handmade kit use?

The Handmade kit is built around the Raspberry_Pi_Pico_with_DVI_sock, from the Raspberry Pi family.

How big is the Handmade kit PCB?

The Handmade kit measures 69.4 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Handmade kit?

12 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Handmade kit design files?

From the homelith/pico-disp-ident repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Handmade kit design in my own project?

Yes, under the terms of its MIT license, which homelith chose for the repository.

Can I test firmware for the Handmade kit without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in pico-disp-ident

Similar boards