HardLabs

Battery powered

homelith·pico-disp-ident·hw/battery_powered/battery_powered.kicad_pcb

Battery powered PCB layout, top view — open source RP2040/RP2350 board by homelith

About the Battery powered PCB

Battery powered is an open source RP2040/RP2350 PCB design by homelith, published on GitHub under the MIT license. It is a 4-layer board measuring 56 × 71.5 mm, with 59 components from 19 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the RT6150B-33GQW, W25Q16JVSNIQ, PCA9306D and OSL10564-IB. By type, the board carries 27 resistors, 15 capacitors, 5 ICs, 4 connectors, 4 switches and 1 crystal.

It belongs with the displays & leds and power & battery designs in this gallery.

From the project

Custom firmware to make some RP2040 board working as DVI display tester & identifier

- RP2040 搭載ボードと PicoDVI (https://github.com/Wren6991/PicoDVI) を使って、DVI ディスプレイに番号入りのテストパターン表示をさせるツールです。 - PicoDVI の feat/x8scale ブランチ (https://github.com/homelith/PicoDVI/tree/feat/x8scale) 版を用いることで、80x60 画像を VGA 640x480 ディスプレイに引き延ばして表示します。

- 環境準備 + Linux ベースの OS 各種上でコンパイル可能と想定 (x8664 ネイティブの ubuntu 22.04 LTS と WSL2 上の ubuntu 22.04 LTS で試験済) + パッケージインストール : sudo apt install git gcc make cmake gcc-arm-none-eabi libnewlib-arm-none-eabi build-essential golang`

Main components on the Battery powered

RT6150B-33GQWW25Q16JVSNIQRP2040PCA9306DOSL10564-IB

Battery powered bill of materials (BOM)

59 components, 19 distinct parts.

QtyPartRefs
1
RT6150B-33GQW
U101
1
W25Q16JVSNIQ
U102
1
RP2040
U103
1
PCA9306D
U104
1
OSL10564-IB
U105
1
FA-238V
Y101
1
5077CR-16SMC2-BK-TR
J101
1
battery_wire_pad
J102
1
BM03B-SRSS-TB(LF)(SN)_pico_debug
J103
1
10029449-111RLF
J104
1
jumper_2pole_solder
SB101
1
SS12D01G4
SW101
3
SKRPABE010
SW102, SW103, SW104
1
SML-E12P8WT86
D101
1
DFE201210S-2R2M
L101
2
C_2012m
C101, C102
13
C_1608m
C103, C104, C105, C106, C107, C108, C109, C110 +5
25
R_1608m
R101, R102, R103, R104, R105, R106, R107, R108 +17
2
742C083101JP
R125, R126

Battery powered design files

The KiCad project lives in the homelith/pico-disp-ident repository on GitHub; these links point at the commit this page was built from.

Battery powered: common questions

What microcontroller does the Battery powered use?

The Battery powered is built around the RP2040, from the RP2040/RP2350 family.

How big is the Battery powered PCB?

The Battery powered measures 56 × 71.5 mm, has 4 copper layers and is 3.0152 mm thick.

How many components are on the Battery powered?

59 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Battery powered design files?

From the homelith/pico-disp-ident repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Battery powered design in my own project?

Yes, under the terms of its MIT license, which homelith chose for the repository.

Can I test firmware for the Battery powered without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in pico-disp-ident

Similar boards