Esp32-c3-environmental sensor board
hossam1238·esp32-c3-environmental-sensor-board
About the Esp32-c3-environmental sensor board
Esp32-c3-environmental sensor board is an open source ESP32 PCB design by hossam1238, published on GitHub. It is a 2-layer board measuring 55 × 35 mm, with 14 components from 10 distinct parts.
Its main chip is the Module, from the ESP32 family. Other key parts include the LGA-8 and SOT-23-5. By type, the board carries 4 resistors, 3 ICs, 3 connectors, 2 switches and 2 capacitors.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
KiCad PCB portfolio project: esp32-c3-environmental-sensor-board
Wi-Fi/BLE environmental sensor node using a certified ESP32-C3 module and BME280 over I2C.
This repository contains a KiCad-editable reference design intended for a junior PCB designer portfolio. It is a preliminary engineering design, not a certified or production-released product.
- Difficulty: Intermediate - Revision: A - Target board: 2-layer FR-4, 1 oz copper, 55 x 35 mm target outline - Design status: schematic and PCB source included; fabrication outputs are preliminary and require a final KiCad review.
Main components on the Esp32-c3-environmental sensor board
Esp32-c3-environmental sensor board bill of materials (BOM)
14 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Module | Custom:ESP32-C3-MINI-1 | U1 |
| 1 | LGA-8 | Custom:BME280 | U2 |
| 1 | SOT-23-5 | Custom:AP2112K-3.3 | U3 |
| 1 | USB-C | Custom:USB_C_Receptacle_USB2.0_16P | J1 |
| 2 | 1x04 2.54mm | Custom:PinHeader_1x04 | J2, J3 |
| 2 | SW_SPST | Custom:SW_Push | SW1, SW2 |
| 1 | 10UF 10uF | Custom:C_0805 | C1 |
| 1 | 100NF 100nF | Custom:C_0603 | C2 |
| 2 | 4.7K 4.7k | Custom:R_0603 | R1, R2 |
| 2 | 10K 10k | Custom:R_0603 | R3, R4 |
Esp32-c3-environmental sensor board design files
The KiCad project lives in the hossam1238/esp32-c3-environmental-sensor-board repository on GitHub; these links point at the commit this page was built from.
Esp32-c3-environmental sensor board: common questions
What microcontroller does the Esp32-c3-environmental sensor board use?
The Esp32-c3-environmental sensor board is built around the Module, from the ESP32 family.
How big is the Esp32-c3-environmental sensor board?
The Esp32-c3-environmental sensor board measures 55 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32-c3-environmental sensor board?
14 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32-c3-environmental sensor board design files?
From the hossam1238/esp32-c3-environmental-sensor-board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Esp32-c3-environmental sensor board design in my own project?
The repository has no license, so all rights stay with hossam1238. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32-c3-environmental sensor board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k