SparkFun HX711 Load Cell
houseofbigseals·grip_strength_meter_pcb·resources/HX711-Load-Cell-Amplifier-V_1.1/hardware/SparkFun_HX711_Load_Cell/SparkFun_HX711_Load_Cell.kicad_pcb
About the SparkFun HX711 Load Cell PCB
SparkFun HX711 Load Cell is an open source PCB design by houseofbigseals, published on GitHub. It is a 2-layer board measuring 30.5 × 22.9 mm, with 25 components from 17 distinct parts.
Other key parts include the W25Q128JVS and REVISION. By type, the board carries 7 capacitors, 5 resistors, 2 ICs, 2 jumpers, 1 transistor and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
schematic and pcb for custom esp32 grip strength meter project
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell and with some calibration you�ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control, or simple presence detection of an object.

Main components on the SparkFun HX711 Load Cell
SparkFun HX711 Load Cell bill of materials (BOM)
25 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | W25Q128JVS HX711 | SO16 | U1 |
| 1 | REVISION | REVISION | U$1 |
| 1 | SS8550 MMBT4403 | SOT23-3 | Q1 |
| 1 | — | 1X05 | J1 |
| 1 | FRAME-LETTER | CREATIVE_COMMONS | FRAME1 |
| 1 | — | 1X02 | JP2 |
| 1 | — | 1X05 | JP4 |
| 1 | — | PAD-JUMPER-2-NC_BY_TRACE_YES_SILK | SJ2 |
| 4 | STAND-OFF | STAND-OFF | STANDOFF1, STANDOFF2, STANDOFF3, STANDOFF4 |
| 1 | 3.3UH 3.3uH | 0805 | L1 |
| 4 | 100NF 0.1uF | 0603-CAP | C1, C2, C4, C5 |
| 1 | 1UF 0.1uF | 0603-CAP | C3 |
| 2 | 100NF 10uF | 1210 | C6, C7 |
| 1 | 20K 20k | 0603-RES | R1 |
| 1 | 8.2K | 0603-RES | R2 |
| 2 | 100R 100 | 0603-RES | R3, R4 |
| 1 | 20K 10K | 0603-RES | R5 |
SparkFun HX711 Load Cell design files
The KiCad project lives in the houseofbigseals/grip_strength_meter_pcb repository on GitHub; these links point at the commit this page was built from.
SparkFun HX711 Load Cell: common questions
How big is the SparkFun HX711 Load Cell PCB?
The SparkFun HX711 Load Cell measures 30.5 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SparkFun HX711 Load Cell?
25 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SparkFun HX711 Load Cell design files?
From the houseofbigseals/grip_strength_meter_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SparkFun HX711 Load Cell design in my own project?
The repository has no license, so all rights stay with houseofbigseals. Use it as a reference, and ask the author before reusing the design.
More boards in grip_strength_meter_pcb
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979