Rerenesans
hs3city·rerenesans_pcb
About the Rerenesans PCB
Rerenesans is an open source ESP32 PCB design by hs3city, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 150 × 124 mm, with 87 components from 31 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. By type, the board carries 37 connectors, 21 resistors, 12 capacitors, 9 transistors, 5 switches and 2 diodes.
From the project
The Re:renesans PCB was created during workshops at Hackerspace Trójmiasto, prepared for the Re:renesans hackathon.
The Re:renesans PCB was created during workshops at Hackerspace Trójmiasto, prepared for the Re:renesans hackathon.
The goal was to design a simple, open solution that can be used in projects combining art, science, and technology.
Participants will create projects inspired by the theme: “United by Light.”
📅 Final hackathon: August 29–31, 2025 📍 Location: Main Library of the University of Gdańsk ⏱ Format: 48-hour project marathon
Main components on the Rerenesans
Rerenesans bill of materials (BOM)
87 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 DEVKIT_V1_ESP32-WROOM-32 | MODULE_DEVKIT_V1_ESP32-WROOM-32 | U1 |
| 3 | BC547C BC547 | TO-92_Inline | Q1, Q3, Q5 |
| 3 | BC557C BC557 | TO-92_Inline | Q2, Q4, Q6 |
| 3 | AOT482L | TO-220-3_Vertical | Q7, Q8, Q9 |
| 2 | Conn_01x19_Pin | PinHeader_1x19_P2.54mm_Vertical | J1, J2 |
| 7 | 691214110002 Screw_Terminal_01x02 | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J3, J4, J5, J9, J33, J34, J41 |
| 1 | 694106301002 Barrel_Jack_MountingPin | BarrelJack_Wuerth_6941xx301002 | J6 |
| 2 | 691243110004 Screw_Terminal_01x04 | TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J7, J15 |
| 3 | B4B-XH-A (LF)(SN) Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8, J10, J16 |
| 9 | 61300511121 Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J11, J12, J13, J14, J17, J18, J19, J21 +1 |
| 1 | 61300411821 Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J20 |
| 1 | 61300311821 BUZZER | PinSocket_1x03_P2.54mm_Vertical | J42 |
| 1 | 61300611821 PCM5102A | PinSocket_1x06_P2.54mm_Vertical | J43 |
| 1 | 61300411821 KY037 | PinSocket_1x04_P2.54mm_Vertical | J44 |
| 2 | 61301021821 Conn_02x05_Top_Bottom | PinSocket_2x05_P2.54mm_Vertical | J45, J47 |
| 1 | 61301621121 Conn_02x08_Odd_Even | IDC-Header_2x08_P2.54mm_Vertical | J46 |
| 2 | XH_B3B-XH-A Conn_01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J48, J50 |
| 2 | 691214110003 Screw_Terminal_01x03 | TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal | J49, J51 |
| 1 | 61300311821 D4012SA | PinSocket_1x03_P2.54mm_Vertical | J52 |
| 1 | 61300811821 Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J53 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 418117270902 SW_DIP_x02 | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW1 |
| 2 | 418117270904 SW_DIP_x04 | SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW2, SW3 |
| 2 | 430186043716 SW_Push | SW_PUSH_6mm | SW4, SW5 |
| 2 | 151051SS04000 LED | LED_D5.0mm | D1, D2 |
| 4 | 860010672005 1uF | CP_Radial_D5.0mm_P2.50mm | C1, C4, C7, C9 |
| 7 | K104K15X7RF5TH5 100nF | CP_Radial_D5.0mm_P2.50mm | C2, C5, C6, C8, C10, C11, C12 |
| 1 | 860010472002 10uF | CP_Radial_D5.0mm_P2.50mm | C3 |
| 12 | CF18JT4K70 4k7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +4 |
| 3 | CFR0W8J0102A50 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R13, R14, R15 |
| 5 | MF0W8FF1003A50 100k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R16, R17, R18, R19, R20 |
| 1 | MF0W8FF3300A50 330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R21 |
Rerenesans design files
The KiCad project lives in the hs3city/rerenesans_pcb repository on GitHub; these links point at the commit this page was built from.
Rerenesans: common questions
What microcontroller does the Rerenesans use?
The Rerenesans is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Rerenesans PCB?
The Rerenesans measures 150 × 124 mm, has 2 copper layers and is 1.62 mm thick.
How many components are on the Rerenesans?
87 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rerenesans design files?
From the hs3city/rerenesans_pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rerenesans design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which hs3city chose for the repository.
Can I test firmware for the Rerenesans without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k