Ares parachute

hslu-ares·ares-parachute-pcb

Ares parachute PCB layout, top view — open source STM32 board by hslu-ares

About the Ares parachute PCB

Ares parachute is an open source STM32 PCB design by hslu-ares, published on GitHub. It is a 2-layer board measuring 57 × 88 mm, with 49 components from 32 distinct parts.

Its main chip is the STM32F103CBTx, from the STM32 family. Other key parts include the XC6206P332MR, AP2552W6-7, SR05-ES, W25Q128JVSIQTR and LIS2DW12TR. By type, the board carries 15 capacitors, 14 resistors, 8 ICs, 5 connectors, 4 LEDs and 1 crystal.

From the project

Repository für die PCB-Design Files für das ARES-Modul an der HSLU, Technik & Architektur

This repository contains the design files for the parachute board for the ARES module at HSLU. Use as reference material or to order your own variation.

All components other than JP1, J5, J6 (all of them available in Werkstatt) and C17 (Supercap) are designed to be manufactured placed from JLCPCB.

The outputs needed to order can be generated from Bouni's JLCPCB Kicad Tools - the currently most recent outputs can be found in the folder jlcpcb/productionfiles. The .zip contains the gerbers, BOM is the bill of materials, CPL_` is the placement file - those are the files asked for when ordering…

Main components on the Ares parachute

Ares parachute bill of materials (BOM)

49 components, 32 distinct parts.

QtyPartRefs
1
XC6206P332MR
U1
1
AP2552W6-7
U2
1
SR05-ES
U3
1
W25Q128JVSIQTR
U4
2
LIS2DW12TR
U5, U7
1
STM32F103CBTx
U6
1
DSIC-02-TS-GER
U8
1
CSTNE8M00G520000R0
X1
1
Conn_01x16_Female
J1
1
Conn_01x02_Male
J3
1
Conn_ARM_JTAG_SWD_10
J4
1
Conn_01x03_Pin
J5
1
MPT 0.5/2-2.54
J6
1
TS-1187A-B-A-B
SW1
1
TYPE-C16PIN
USB1
2
RED
LED1, LED2
1
YLW
LED3
1
GRN
LED4
2
47p
C1, C6
2
1u
C2, C3
Show 12 more
QtyPartRefs
1
10u
C4
8
100n
C5, C7, C9, C11, C12, C13, C14, C16
1
4u7
C15
1
1F
C17
2
33
R1, R2
1
270
R3
1
56k
R4
2
5k1
R5, R6
4
4k7
R7, R8, R10, R11
2
560
R12, R13
1
2k2
R14
1
100
R15

Ares parachute design files

The KiCad project lives in the hslu-ares/ares-parachute-pcb repository on GitHub; these links point at the commit this page was built from.

Ares parachute: common questions

What microcontroller does the Ares parachute use?

The Ares parachute is built around the STM32F103CBTx, from the STM32 family.

How big is the Ares parachute PCB?

The Ares parachute measures 57 × 88 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ares parachute?

49 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ares parachute design files?

From the hslu-ares/ares-parachute-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ares parachute design in my own project?

The repository has no license, so all rights stay with hslu-ares. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ares parachute without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards