16 open source boards using the W25Q128JVSIQTR

Real designs built with the W25Q128JVSIQTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the W25Q128JVSIQTR

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the W25Q128JVSIQTR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF (then 4.7 µF).
  • The CS pin has a pull-up to 3.3V on 8 of 15 designs, most often 10 kΩ (then 1 kΩ).
  • The CS pin has a series resistor on 6 of 15 designs, most often 1 kΩ (then 0 Ω).
CSpin 1Connected to: The microcontroller 67%
  • Pull-up to 3.3V on 53% · 10 kΩ (4), 1 kΩ (1), 47 kΩ (1)
  • Series resistor on 40% · 1 kΩ (4), 0 Ω (1)
GNDpin 4Connected to: GND 100%
VCCpin 8Connected to: 3.3V 93%
  • Decoupling capacitor on 93% · 100 nF (17), 4.7 µF (2), 10 nF (1)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Peripheral board v1a by BroncoSpace-Lab, TET-Module by ICDT-Inatel-Cubesat-Design-Team, Pico stretch2 by jvanderberg and Magic-8-badge by tylercrumpton.

The W25Q128JVSIQTR in open source designs

The gallery holds 16 open source boards using the W25Q128JVSIQTR from 16 GitHub repositories; a typical one measures about 86.8 × 86 mm and carries around 94 components.

69% use four copper layers or more, and 25% carry an open source license.

The most starred is Peripheral board v1a by BroncoSpace-Lab.

Microcontrollers on boards using the W25Q128JVSIQTR

W25Q128JVSIQTR: common questions

Where can I find a W25Q128JVSIQTR reference design?

Each of the 16 boards on this page is a real design using the W25Q128JVSIQTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q128JVSIQTR VCC pin?

The VCC pin has a decoupling capacitor on 14 of 15 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 15 open source designs using the W25Q128JVSIQTR.

What pull-up resistor is used on the W25Q128JVSIQTR CS pin?

The CS pin has a pull-up to 3.3V on 8 of 15 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 15 open source designs using the W25Q128JVSIQTR.

What parts are used alongside the W25Q128JVSIQTR?

The RP2040, AMS1117-3_3, CH340E, EA3036C and ICM-42688-P appear in the most repositories here.

Which microcontrollers do boards using the W25Q128JVSIQTR use?

Most are built on RP2040/RP2350 (6), STM32 (4), ESP32 (1) and FPGA (1).

How big is a typical board using the W25Q128JVSIQTR?

The median is 86.8 × 86 mm, and 31% are two-layer designs.

What is the most popular open source board using the W25Q128JVSIQTR?

By GitHub stars, Peripheral board v1a by BroncoSpace-Lab, with 6 stars.

Can I simulate one of these boards using the W25Q128JVSIQTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part