28 open source boards using the LIS2DW12TR
Real designs built with the LIS2DW12TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Testy
mmalex
39.5 × 64.7 mm61 parts2LMIT10SnapHAT main board
marchmare
100 × 68.1 mm90 parts2LApache-2.04Hellen88bmw
rusefi
160 × 118 mm298 parts4LNo license2Pebble
bclswl0827
29.2 × 29.2 mm22 parts2LMIT2Hellen154hyundai
rusefi
164 × 156 mm201 parts4LNo license1Hellen miata-NA6
rusefi
154 × 159 mm196 parts2LNo license1Hellen miata-NA8
rusefi
154 × 159 mm186 parts2LNo license1Hellen miata-NB1
rusefi
154 × 159 mm185 parts2LNo license1STM32
CatAlarm
joshua-sct
90 × 50 mm74 parts2LGPL-3.01Nordic nRF
Dial me spinner main
tyevco
64 × 64 mm187 parts4LNo license0Hellen72 NB2
rusefi
154 × 159 mm175 parts2LNo license0STM32
Findme-LTE
Miha22
20.3 × 93.3 mm122 parts4LMIT0ESP32
Smart Safety Tag V1
balu-16
60 × 42 mm76 parts2LNo license0Nordic nRF
Phasetag
JaphD
35 × 42.5 mm56 parts4LNo license0ESP32
Esp32c6-ble sensor coin cell
xmyoot
31.4 × 31 mm53 parts4LNo license0BPV4 Collar
rees3901
50 × 25 mm51 parts2LNo license0ESP32
Adapter board r2
picafe
68.4 × 33.4 mm51 parts4LNo license0Lorawan airrh
sudochamp
36 × 75.2 mm50 parts4LGPL-3.00STM32
Ares parachute
hslu-ares
57 × 88 mm49 parts2LNo license0Nordic nRF
NadiSense
yeswantsakthi-hub
66.8 × 6 mm48 parts2LNo license0BRACHIOSAURUS
FelixStA52
110 × 119 mm48 parts2LNo license0STM32
Pendant
picafe
33.2 × 33.2 mm45 parts4LNo license0STM32
Solar telemetry
pgupta9204
22 × 26 mm38 parts4LNo license0RP2040/RP2350
Testy parts
mmalex
39.6 × 62.5 mm56 parts2LMIT10Hellen1-72
rusefi
154 × 159 mm126 parts2LNo license0BPV4 CollarEVAL
rees3901
100 × 50 mm51 parts2LNo license0ESP32
ESP32-C6
uutzinger
17.8 × 30.3 mm43 parts2LNo license0STM32
Jantteri hit detector
OJ2016
80 × 15.1 mm30 parts2LNo license1
How designs wire the LIS2DW12TR
Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the LIS2DW12TR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 20 of 23 designs, most often 100 nF (then 10 µF).
- The VDD_IO pin has a decoupling capacitor on 20 of 23 designs, most often 100 nF (then 10 µF).
- The RES pin is tied to GND on 23 of 24 designs.
- The INT2 pin is left unconnected on 16 of 23 designs (a signal on 7).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCL/SPCpin 1 | Connected to: The microcontroller 52%, a connector 28% |
|
| SDA/SDI/SDOpin 4 | Connected to: The microcontroller 56%, a connector 28% |
|
| NCpin 5 | Connected to: Not connected 76% · GND 24% | — |
| GNDpin 6, 8 | Connected to: GND 90% | — |
| RESpin 7 | Connected to: GND 96% | — |
| VDDpin 9 | Connected to: 3.3V 91% |
|
| VDD_IOpin 10 | Connected to: 3.3V 91% |
|
| INT2pin 11 | Connected to: Not connected 70% · a signal 30% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Testy by mmalex, SnapHAT main board by marchmare, Pebble by bclswl0827 and Hellen88bmw by rusefi.
The LIS2DW12TR in open source designs
The gallery holds 28 open source boards using the LIS2DW12TR from 25 GitHub repositories; a typical one measures about 65.4 × 63.3 mm and carries around 56 components.
64% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Testy by mmalex.
Parts used alongside the LIS2DW12TR
Microcontrollers on boards using the LIS2DW12TR
What boards using the LIS2DW12TR are built for
LIS2DW12TR: common questions
Where can I find a LIS2DW12TR reference design?
Each of the 28 boards on this page is a real design using the LIS2DW12TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LIS2DW12TR VDD pin?
The VDD pin has a decoupling capacitor on 20 of 23 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 25 open source designs using the LIS2DW12TR.
What decoupling capacitors do designs use on the LIS2DW12TR VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 20 of 23 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 25 open source designs using the LIS2DW12TR.
How is the LIS2DW12TR RES pin connected?
The RES pin is tied to GND on 23 of 24 designs. Counted from the KiCad layouts of 25 open source designs using the LIS2DW12TR.
What parts are used alongside the LIS2DW12TR?
The L6205PD, MCP6002-XSN, LPS25HB, MPX4_MAP and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the LIS2DW12TR use?
Most are built on STM32 (6), ESP32 (4), Nordic nRF (3) and RP2040/RP2350 (2).
How big is a typical board using the LIS2DW12TR?
The median is 65.4 × 63.3 mm, and 64% are two-layer designs.
What is the most popular open source board using the LIS2DW12TR?
By GitHub stars, Testy by mmalex, with 10 stars.
Can I simulate one of these boards using the LIS2DW12TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.